EasyManua.ls Logo

CPS FX134a Series User Manual

CPS FX134a Series
14 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
FX134a SERIES REFRIGERANT RECOVER
/ RECYCLE / VACUUM AND RECHARGE UNIT
OPERATION MANUAL
Models: FX134a
Covered under US Patent
8,082,750 and other
patents pending.
Certified by ITS under SAE
J2911 to meet SAE J2788
for R-134a.
Certified by ITS under SAE
J2911 to meet high voltage
compressor service per SAE
J2788 R-134a.
Question and Answer IconNeed help?

Do you have a question about the CPS FX134a Series and is the answer not in the manual?

CPS FX134a Series Specifications

General IconGeneral
Frequency50/60 Hz
Output Voltage12 VDC
RefrigerantR134a
Efficiency85%
ProtectionOverload, Short Circuit
Storage Temperature-20°C to 85°C

Summary

Specifications

Introduction to the FX Series

General Safety Precautions

Icon Library and Function Descriptions

First Time Unit Startup Procedure

Theory of Operation for FX Series

Recovery Operation

Explains the process of recovering refrigerant from the vehicle system.

Vacuum Operation

Details the process of removing air and moisture from the AC system.

Charge Operation

Outlines the procedure for refilling the vehicle system with refrigerant.

Other Unit Functions

Full Cycle Operation

Describes the complete cycle of recover, vacuum, leak check, and charge.

Tank Refill Operation

Explains how to add refrigerant to the internal storage tank.

Change Units Function

Allows changing measurement units for charge amounts.

Add Oil Prompt

Reminder to add oil lost during recovery.

Car System Health Mode

Checks system pressures and vent temperature before/after service.

Change Unit of Measure or Language

Screen to select measurement units or language.

Air Purge Function

Reduces non-condensable gases in the storage tank.

Loading New Firmware

Procedure for updating system software via USB.

Maintenance and Care Guide

Filter Changes

Instructions for replacing the filter/dryer.

Scale Maintenance

Procedures for checking, taring, or calibrating the internal tank scale.

Pressure Transducer Maintenance

Steps for setting or calibrating internal pressure transducers.

High Pressure Alert

Explanation of the high pressure warning and its causes.

Tank Overfill Limit

Details the storage tank's maximum capacity and warnings.

Service Mode

Mode for testing unit components, requires technical direction.

Field Software Update

Guide for updating system software via USB drive.

Display Calibration

Procedure to recalibrate the touch screen display.

Parts List and Warranty Information

Common Part List

Table of common part numbers and their descriptions.

Warranty & Repair Policy

Details the warranty coverage and repair procedures for the unit.

A/C Database End-User License Agreement

Miscellaneous Agreement Clauses

Covers agreement terms, governing law, and amendments.