Cradlepoint MBR95 Setup Guide

2
Internal Antennas
802.11b/g/n Wi-Fi
2x2 2.4GHz radio
Internal Antennas
802.11b/g/n Wi-Fi
2x2 2.4GHz radio
Active Ethernet
Port Connections
1 - 4 LAN
Connected
To Power
Mobile Broadband
Modem
WAN
4G/3G Modem
Signal Strength
WPS
On/Off
Cable, DSL, or
Satellite Modem
WAN
Wireless
Broadcast
3
Connect a Computer,
Printer, Switch, etc.
1 - 4 LAN Ethernet Port
Connect a
Cable/DSL/
Satellite Modem
WAN Ethernet Port
Connect a Mobile
Broadband Modem
USB 2.0
Wireless Broadcast
off/on
Power
| = on
O = off
Connect the
power supply
Factory
Reset
press & hold
10 seconds
/ / / / / / /  of the front of your MBR95 / / / / / / /  of the back of your MBR95
DISPLAY LEDs

Cradlepoint MBR95 Specifications

General

Ethernet LAN	Yes
Networking standards	IEEE 802.3
Ethernet LAN data rates	10, 100 Mbit/s
Ethernet LAN interface type	Fast Ethernet
Wi-Fi standards	802.11b, 802.11g, Wi-Fi 4 (802.11n)
Top Wi-Fi standard	Wi-Fi 4 (802.11n)
WLAN data transfer rate (max)	300 Mbit/s
Bandwidth	2.4 GHz
Interface	RJ-45
Input voltage	12 V
Dimensions (WxDxH)	199.7 x 134.7 x 38.7 mm
Operating temperature (T-T)	32 - 104 °F
Supported network protocols	NAT, SPI, ALG, inbound filtering of IP addresses, Port Blocking, Service Filtering (FTP, SMTP, HTTP, RPL, SNMP, DNS, ICMP, NNTP, POP3, SSH), Protocol filtering, WAN ping (allow/ignore)
Security algorithms	WPA2
Ethernet LAN (RJ-45) ports	5
Certification	FCC, CE, WiFi Alliance, IC, RoHS
Product color	Black

Weight and Dimensions

Weight	226 g