IBR1700 Mobile Router Quick Start Guide
Introduction
This guide provides instructions for the basic set up of your COR IBR1700 mobile router as well as discusses what's inside the box and optional accessories
to enhance the router's functionality. For instructions on installing the router in your vehicle, refer to the Vehicle Installation Guide for COR Series Mobile
Routers (https://customer.cradlepoint.com/s/article/Vehicle-Installation-Guide-for-COR-Series-Mobile-Routers).
Navigation
What's in the Box
Hardware
Accessories
Required
Optional
Before You Begin
Location Considerations
SIM Card for Wireless Connectivity
Best Practice: Choosing SIMs for Adverse Environments
Setup
STEP 1: Insert an activated 2FF-sized SIM into the router.
STEP 2: If using a MC400 modular modem, insert activated 2FF-sized SIM card(s) into the modem.
STEP 3: Set up the Antenna and WiFi Configuration.
STEP 4: Connect the power source.
STEP 5: Activate the device through NetCloud Manager.
Understanding LEDs
Connecting to NetCloud
COR IBR1700 Mobile Router Models
Troubleshooting
Resources
Help and Support
Terms of Service