To Next PageTo Next PageWhy won't my CRAFFT Washer start?
Your CRAFFT Washer might not be starting due to several reasons. First, check if there's a power failure or if the power cord is properly connected to the electrical outlet. Also, verify if the electric fuse is broken and ensure that you've turned the power on and pressed the Start/Hold button. Finally, make sure there is enough water in the tub.
What to do if my CRAFFT CFW145T won't drain?
If your CRAFFT Washer isn't draining, there could be a few reasons. Check if the drain hose is frozen or blocked with dirt. Also, inspect the drain hose to ensure it is not kinked or deformed. Make sure the end of the drain hose isn't immersed in water, and check for excessive dirt inside the pump housing.
Why is my CRAFFT CFW145T not filling with water?
If your CRAFFT Washer isn't filling with water and a lamp lights up with a buzzer after 20 minutes, several issues could be the cause. Ensure that you've connected the inlet hose and opened the water tap. Check if the inlet hose or water tap is frozen. Verify that the water supply isn't shut off and inspect the inlet hose filter for any blockages from foreign matter.
Guidance on selecting an appropriate location and ensuring correct installation.
Instructions for connecting the drain hose for proper water removal.
Details the essential steps for correctly grounding the washing machine for safety.
Instructions on how to load the washing machine for best performance and balance.
General washing course selected by artificial brain sensor.
Suitable for heavily soiled clothes like workwear or sportswear.
Controls for individual cycle durations and spin-only operation.
Instructions for cleaning both Type I and Type II lint filters.
Steps to clean the filter preventing leaks from the water inlet.
Checks for issues preventing the washer from operating or draining correctly.
Troubleshooting steps for problems related to the spin cycle.
General