Craftex B2062L - Page 5

5
INTRODUCTION
As part of the growing line of Craftex woodworking equipment, we are proud to
offer the B2062L, 12” Left Tilting Arbor Table Saw. The Craftex name guarantees
Craft Excellence. By following the instructions and procedures laid out in this
owner’s manual, you will receive years of excellent service and satisfaction. The
B2062L is a professional tool and like all power tools, proper care and safety
procedures should be adhered to.
FEATURES
 3 HP, Single Phase, 220 volt Motor.
 Blade Speed, 4,140 RPM’s.
 Triple ‘V’ Belt Drive.
 Left Tilting Arbor.
 Precision Ground Cast Iron Main Table and Extensions.
 Overall Table Size, 30” x 48”.
 Cast Iron Trunions with Sealed Ball Bearings.
 Magnetic Power Switch with Emergency Shut-off Button.
 Cast-iron Dado Table Insert.
 Extension Arbor Bolt, Nut and Washer for Dado Usage.
 ‘T’ Slot Miter Gauge.
 Two Push Sticks Included.
 Sloped Bottom Shelf to Direct Sawdust.
 4” Dust Port for Dust Collection System.
 Built-in Mobile Base with Two Wheel Locks.
 ‘T’ Type, Heavy Duty Cam Lever Rip Fence.
 Magnifying Cursor Lens.
 53” Ripping Capacity.
 Maximum Depth of Cut at 90 Degrees – 4”.
 Maximum Depth of Cut at 45 Degrees – 2 5/8”.
 Shipping Weight – 230 kg.
2 Year Warranty.