Electrical Connections Continued ...
Ground
Optional
Light
Common Problems
Problem A: Fan Will not Start
Remedies: 1. Check fuse or circuit breaker and replace if necessary
2. Turn off electrical power and check all wire connectors.
3. Check on/offTCS and wall control selector switch. See operation
instructions.
Problem B: Fan is Excessively Noisy
Remedies: 1. Check that all screws in fan assembly are tight and properly seated.
2. Check to make sure mounting bracket is installed properly.
3. Check to make sure light kit and glass reinstalled properly and tight.
4. If wall control is used, insure the wall control is not a transformer or
a variable speed type.
Problem C: Fan Wobbles
Remedies: 1. Check that all blades are screwed firmly into blade holders.
2. Check that all blade holders are screwed firmly into motor.
3. Check the weight of blades. All our blades are weighed on electronic
scales. The weight is marked on the reverse side of the fan blade near
the motor end. All of the blades should be the same weight to
prevent fan from wobbling.
4. A balancing kit is enclosed if needed.
PRODUCT MODEL WEIGHT(LBS)
RT52 26.0
CH52 26.8
SA52 28.4
SL52 35.2
TL52 25.5
WD52 26.8
LT52 24.9
CP52 24.0
OA52 30.8
OMI52 24.2
KILOGRAMS
11.8
12.2
12.9
16.0
11.6
12.2
11.3
10.9
14.0
11.0
Instrucciones de instalaci6n
Modelos: CH52, RT52, S
SL52, TL52,
LT52,CP
OM
To Previous Page
Loading...
