Craftsman 103.24521 User Manual

OPERATING INSTRUCTIONS
AND PARTS LIST FOR
CRAFTSMAN DRILL PRESS
MODEL NUMBER 103.24521 & 103.24531
The model number of your Drill Press will be found on a plate located on the
base near the column. Always mention this number when communicating with
us regarding your Drill Press, or when ordering parts.
HOW TO ORDER REPAIR PARTS
All parts listed herein may be ordered through SEARS, ROEBUCK AND CO.
or SIMPSONS-SEARS LIMITED. When ordering parts by mail from the mail
order house which serves the territory in which you live, selling prices will be
furnished on request or parts will be shipped at prevailing prices and you will
be billed accordingly.
WHEN ORDERING REPAIR PARTS, ALWAYS GIVE THE FOLLOWING
INFORMATION AS SHOWN IN THIS LISL
103.24521 or
103.24531
2. The PART NAME. 4. The NAME of item. DRILL PRESS
1. The PART NUMBER. 3. The MODEL NUMBER.
COAST TO COAST NATION-WIDE
SERVICE FROM SEARS
FOR YOUR CRAFTSMAN POWER TOOLS
SEARS, ROEBUCK AND CO. and
SIMPSONS-SEARS LIMITED in Canada
back up your investment with quick, ex-
pert mechanical service and genuine
CRAFTSMAN replacement parts.
If and when you need repairs or service,
call on us to protect your investment in
this fine piece of equipment.
SEARS, ROEBUCK AND CO. - U.S.A.
IN CANADA, SIMPSONS-SEARS LIMITED
SOURCE FORM 27979-5AB
Lithographed in U.S.A.

Craftsman 103.24521 Specifications

General

Brand	Craftsman
Model	103.24521
Category	Power Tool
Language	English

Summary

How to Order Repair Parts

Nation-Wide Service from Sears

Drill Press Assembly

Installation and Setup

Motor and Speed Configuration

Guidance on motor mounting, pulley selection, and belt tension for optimal speed.

Lubrication and Maintenance

Recommendations for lubricating moving parts and general care to prevent rust.

Control System Operation

Explanation of the feed stop, quill lock, and table/headstock lock handles.

Adjustments and Operation

Drill Bit Usage and Sharpening

Description of various drill bits and the correct procedure for sharpening them.

Chuck Removal Procedure

Instructions for safely removing the drill chuck from the spindle without damage.

Parts List