To Next PageTo Next Page
Need help?Do you have a question about the Craftsman 315.17473 and is the answer not in the manual?
General| Model Number | 315.17473 |
|---|---|
| Type | Circular Saw |
| No Load Speed | 5000 RPM |
| Blade Diameter | 7-1/4 inches |
| Bevel Capacity | 45 degrees |
| Depth of Cut at 45 degrees | 1-3/4 inches |
Carefully read the owner's manual, learn applications, limitations, and potential hazards for safe use.
Always wear safety goggles or safety glasses with side shields for eye protection during operation.
Step-by-step instructions on how to safely install and remove router cutters and collets.
Guides on how to set and adjust the router's depth of cut for various tasks.
Provides guidance on proper grip, feed, and control for effective routing.
Explains the importance of the correct feed rate for smooth cuts and avoiding tool overload.
Emphasizes careful setup and proper feed rate selection for professional routing results.
Describes the negative effects of forcing the router and how to detect it.
Explains the issues caused by feeding too slowly, like scraping and heat buildup.
Discusses the impact of depth of cut on feed rate, quality, and potential tool damage.
Detailed steps for replacing the router's main switch, including wiring notes.
