To Next PageTo Next Page
Need help?Do you have a question about the Craftsman 315.174921 and is the answer not in the manual?
General| Model Number | 315.174921 |
|---|---|
| Type | Drill Press |
| Table Tilt | 45 degrees left and right |
| Voltage | 120V |
| Power Source | Corded Electric |
| Chuck Size | 1/2 inch |
Safety concept eliminating grounded cords for electric power tools.
Router is versatile for professionals and amateurs, offering years of performance.
Read all instructions carefully for safe operation, covering tool knowledge and hazards.
Warnings about connecting power before adjustments and the importance of wearing safety glasses.
Detailed steps for safely installing and removing router cutters using the spindle lock.
Recommendations for making cuts at specific depths, including depth adjustment steps.
Guidance on proper router operation, including grip, speed, and feeding into the workpiece.
Explanation of feed rates, including force feeding, too slow feeding, and proper feeding.
Details on depth of cut impact and guidance on managing kickback via feed direction.
How to use pilot bits for edge shaping and techniques for starting/ending cuts.
Procedure for using guide bushings and recommendations for extension cord use.
List of recommended accessories available at the time of printing.
Tips for maintaining cutters, including cleaning, sharpening, and collet care.
Step-by-step guides for replacing the router's switch and work light bulb.
Information on servicing, parts replacement, cleaning, and general safety tips.
