To Next PageTo Next PageWhy won't my Craftsman Vacuum Cleaner pick up dirt?
If your Craftsman Vacuum Cleaner won't pick up dirt, the possible causes are a clogged filter, a clogged hose, or an air leak. To resolve this: * Clean or replace the filter, following the instructions on page 10. * Remove the hose and clear any debris. * Ensure the power head is securely attached to the dust drum.
General| Brand | Craftsman |
|---|---|
| Model | 113.177135 |
| Category | Vacuum Cleaner |
| Language | English |
Crucial safety guidelines to prevent hazards like fire, electric shock, and injury.
Defines DANGER, WARNING, and CAUTION to communicate hazard severity.
Detailed warnings related to operation, including flammable materials and electrical shock.
Explains the importance of grounding and potential risks of improper connection.
Overview of the vacuum's purpose and steps for unpacking and checking components.
Identifies and describes the key parts and features of the wet/dry vacuum.
Proper methods for storing the power cord and hose for safety and convenience.
Procedures for vacuuming dry debris, including filter requirements and maintenance.
Guidelines for wet pickup, including filter removal and the float mechanism.
Steps for safely removing the power head and emptying the vacuum drum.
Instructions and safety advice for utilizing the vacuum's blowing function.
Steps for cleaning and replacing the filter for optimal vacuum performance.
Methods for cleaning the vacuum exterior/interior and proper storage.
Solutions for common problems like the vac not picking up dirt or not running.
