To Next PageTo Next Page
Need help?Do you have a question about the Craftsman 113.238180 and is the answer not in the manual?
General| Type | Wood Lathe |
|---|---|
| Swing Over Bed | 12 inches |
| Distance Between Centers | 36 inches |
| Motor Power | 1/2 HP |
| Tailstock | Yes |
| Bed Material | Cast Iron |
Ensure proper grounding and avoid electrical hazards.
Maintain a clean area, wear protective gear, and keep children away.
Follow safe procedures for speed, tools, and workpiece security.
Details on workpiece throw, tool bite, and correct turning direction.
Emphasizes eye protection, apparel, and secure workpiece setup.
Highlights dangers like workpiece throw, tool bite, and improper direction.
Details from the DANGER label regarding safety compliance.
Warns against complacency and the dangers of a careless fraction of a second.
Details on correct RPM usage and dangers of higher speeds.
Stresses wearing safety goggles to prevent severe eye damage from flying objects.
Guides on using a grounded outlet and proper plug connection.
Procedures for positioning and securing the motor onto the mounting holes.
Verifying the spindle rotates counterclockwise when viewed from the spindle end.
Step-by-step guide on moving the belt between pulleys to alter lathe speed.
Procedures for driving centers into wood and mounting it on the lathe.
Steps for using the index pin to mark equal divisions on a workpiece.
