Craftsman 113.23881 User Manual

, m,_ ii , i
OPERATING INSTRUCTIONS
AND PARTS LIST FOR
C RAFTS MAN [.AT H !
12 INCH SWING, 36 INCHES BETWEEN CENTERS
MOD|IL NUMBER 113.23881
The model number of your Lathe will be found stamped on the back of the
Headstock cover. Always mention this model number when communicating
with us regarding your Lathe or when ordering parts.
HOW TO ORDER R|PAIR PARTS
All paris listed herein may be ordered through SEARS, ROEBUCK AND CO.
or SIMPSONS-SEARS LIMITED. When ordering parts by mail from the mail
order house which servesthe ter_ritoryin which you live, sellingpriceswill be
furnishedon request or parts will be shipped at prevailing prices and you will
be billed accordingly.
WHEN ORDERING REPAIR PARTS, ALWAYS GIVE THE FOLLOWING
INFORMATION AS SHOWN IN THIS LIST:
1. The PART NUMBER.
2. The PART NAME.
3. The MODEL NUMBER-113.2388t
4. The NAME of item-LATHE,
SEARS, ROEBUCK AND CO. and
StMPSONS-SEARS LIMITED in Canada
back up your investmentwith quick, ex-
pert mechanical service and genuine
CRAFTSMAN replacement parts.
If and when you need repairs or service,
call on us to protect your investmentin
thisfine piece of equipment.
S AR$,ROmUCKANDco.- u.s.A.
JN CANADA, SIMPSONS-SEARS LIMtT|D
SOURCE FORM 756929 Lithographed in UoS.A.

Craftsman 113.23881 Specifications

General

Type	Wood Lathe
Swing Over Bed	12 inches
Distance Between Centers	36 inches
Motor Power	1/2 HP
Spindle Nose Thread	1 inch x 8 TPI

Summary

How to Order Repair Parts

Assembly and Installation

Assembling

Details on how to assemble the lathe after shipment, including aligning the tailstock and headstock.

Installation

Instructions for securely mounting the lathe on a workbench and motor installation.

Lubrication

Information on lubricating precision ball bearings and maintaining the lathe bed.

Speed and Rotation

Guidance on checking the direction of rotation and setting the spur center.

Lathe Controls

Tailstock Lock

How to adjust the distance between centers by loosening the tailstock lock.

Handwheel

Method for minor adjustments to the distance between centers using the handwheel.

Tailstock Ram Lock

Function of the ram lock to hold the tailstock ram fixed during cutting operations.

Tool Slide Lock Clamp Handle

How to adjust the angle or position of the tool rest holder.

Tool Rest Lock

Securing the adjustable tool rest for any turning operation.

Indexing Pin

Description of the indexing pin's function for spacing and locking the spindle.

Turning Chisels and Operation

Turning Chisels

Overview of basic turning chisel types: gouge, spear point, round nose, and parting tool.

Operation: Turning Between Centers

Detailed steps for turning between centers, including rough cuts and finishing.

Advanced Turning and Safety

Turning Flat Work

Techniques for surface turning on flat work using a face plate.

Safety Precautions

Essential safety guidelines for operating the lathe, including clothing and mounting.

Accessories

List of available accessories for the lathe that can be purchased separately.

Parts List