Craftsman 113.29931 User Manual

Owner's Manual
II:RRFTSMRN'I
RAILS AND FENCE SYSTEM
FOR CRAFTSMAN 10 in. TABLE SAWS MODEL NOS.
315.228310, 315.228410, 315.228510, 113.299310, 113.299410, 113.299510
Item No.
_929993
TABLE SAWNOT INCLUDED
Save this manual for
future reference.
_, CAUTION: Read and follow
all Safety Rules and Operating
Instructions before first use of
this product.
Customer Help Line: 1-800-932-3188
Sears, Roebuck and Co., Hoffman Estates, IL 60179 USA
Visit the Craftsman web page: www.sears.com/craftsman
972000-662
3-99
• SAFETY
• LOOSE PARTS
• PREPARATION
• INSTALLATION
• ALIGNMENT

Craftsman 113.29931 Specifications

General

Brand	Craftsman
Model	113.29931
Category	Accessories
Language	English

Summary

Safety Rules

General Safety Precautions

Read all instructions, know your tool, keep area clean, wear safety glasses, disconnect power, and save instructions.

Loose Parts List

Preparation Steps

Removing Existing Rails

Instructions for removing the front and rear rails, including loosening screws and nuts.

Installation Guide

Installing the Rear Rail

Detailed steps for attaching the rear rail, including alignment and securing with screws.

Installing the Front Rail

Procedure for mounting the front rail, aligning it with the table and securing it.

Mounting the Switch

Steps for attaching the switch assembly to the front rail and securing it.

Fence and Rail Alignment

Aligning Rip Fence and Front Rail

Ensuring the rip fence moves freely with proper clearance and adjusting the front rail if needed.

Rip Fence and Blade Alignment

Checking Alignment

Procedure to check and adjust the rip fence parallel to the blade using a framing square.