Craftsman 486.24628 User Manual

Operator's IVlanuai
®
BRUSH GUARD
Model No. 486.24628
DO NOT RETURN TO STORE
For Missing Parts or Assembly
Questions Call 1-866-576-8388
CAUTION:
Before using this product, read
this manual and follow all Safety
Rules and Operating Instructions.
,, Safety
,, Assembly
,, Operation
,, Maintenance
,, Parts
Sears, Roebuck and Co., Hoffman Estates, IL 60179 U.S.A.
www.sears.com/craftsman
PRINTED IN U.S.A. FORM NO. 42187 (12/11/08)

Craftsman 486.24628 Specifications

General

Brand	Craftsman
Model	486.24628
Category	Accessories
Language	English

Summary

Assembly Steps

Step 1: Latch and Spring Attachment

Slide latch ends into bumper slots and attach springs to latch rods for correct alignment.

Step 2: Spring and Bolt Assembly

Attach springs to bolt, then assemble bolt onto bumper using nuts, ensuring bolt end extends.

Step 3: Frame Brace Installation

Assemble hex bolt, washer, frame brace, and lock nut to the rear hole of the bumper.

Operation Procedures

Tilt Bumper Down

Push bumper lightly and pull latch to tilt bumper down before raising tractor hood.

Lock Bumper Up

Push bumper up into position; the latch will secure it in the raised state.