Craftsman 13235 - User Manual

CRRFTSMRN
DIGITAL TORQUE WRENCH
User Instructions for Models 13235,13236
NAMES AND FUNCTIONS OF PARTS
5 6
3 A
1 e
g 10 11 13 la
€
SAFETY RULES
8
1. Study this manual carefully before attempting to operate this wrench.
Never apply more torque than the maximum scale reading
a. This torque wrench is designed for manual tightening of threaded
fasteners only.
DO NOT USE IT AS A NUT-BREAKER OR FOR ANY OTHER PURPOSE.
9. Torque value
10. Unit
11. LED indicator
IE. Up/Oown buttons
13.-Zero{ng/Glear4iuttoft
1. Reversible ratchet head
a. Direction Lever
3. LCD readout
4. Buttons
5.-Handle— —
B. Battery cap
7. Ratchet drive
B. Buzzer
or sockets may cause them to suddenly break. Ratchets that are
improperly engaged, worn out, damaged, or over-torqued may slip or break.
TO PREVENT INJURY, KEEP PROPER FOOHNS AND BALANCE AT ALL TIMES.
DO NOT USTTHE WRENCH IN PLACES FROM WHICH YOU MAY FALL
OR SUP,
OR AROUND OPERAHNG MACHINERY.
Torque wrench not in calibration may cause damage to parts or tools.
5. Do not use extensions on handle as damage to torque wrench will result.
6. Handle is not insulated. Do not use on live electrical
or high voltage
circuits.
BEFORE USING THE WRENCH
Battery INSTALLAHON
1. Remove the battery cap.
a. Insert two AA batteries aligning the -h polarities of the batteries
as indicated.
3. Put on the battery cap and rotate it tightly according to the following figures.
ALWAYS USE EYE PROTECTION WHILE USING HAND TOOLS
A WARNING: RISK OF FLYING PARTICLES
A INJURY MAY RESULT FROM ELECTRICAL SHOCK
SPECIFICATIONS
13E35
13336
Model No.
l/E" Ratchet 3/8" Ratchet
Drive
50-a50ft-lbs
aO-lOOft-lbs
Capacity
0.1-ft.lbs
Increments
0.1-ft.lbs
a5.B"
1B.3"
Length
4.30/68.78 (1950)
Weight, Ib/oz (gm)
a.51/40.ai(U40)
ACCURACY: +/-3% on clockwise, +/-4% on counter clockwise.
Complies with American National Standards ASME 8107.38 and ISO 17035.
11/21 (09-13235/13236)

Craftsman 13235 Specifications