To Next PageTo Next Page
Need help?Do you have a question about the Craftsman REXON 137.229171 and is the answer not in the manual?
General| Category | Power Tool |
|---|---|
| Type | Angle Grinder |
| Power Source | Corded Electric |
| Voltage | 120V |
| Model | 137.229171 |
| Wheel Diameter | 4.5 inches |
| No Load Speed | 11000 RPM |
| Spindle Thread | 5/8-11 in. |
Details the terms of the one-year warranty for defects in material or workmanship.
General guidelines for safe operation and use of the drill press.
Specific safety rules and precautions for operating the drill press.
Provides guidance on selecting and using appropriate extension cords for the drill press.
Lists optional accessories recommended for the drill press.
Details the items included in the drill press packaging for unpacking and checking.
Step-by-step instructions for assembling the drill press components.
Procedure to align the table perpendicular to the drill press head.
Instructions on how to use the bevel scale for tilting the table.
Instructions for reducing play in the spindle and quill assembly.
How to adjust the tension of the quill return spring.
Procedures for properly setting and adjusting the belt tension.
Core procedures and guidelines for using the drill press effectively and safely.
Information on selecting appropriate speeds and belt configurations for drilling.
Details on the power switch operation and installing drill bits.
Instructions on setting up and using the workpiece fence for precision drilling.
Methods for drilling blind holes to a precise depth.
Procedures for securing the chuck at a set depth and its removal.
Guidelines for securing the workpiece and positioning the table for drilling.
Procedures for tilting the table and proper feed rate for cutting.
General care and upkeep procedures for the drill press.
Guidelines for lubricating various moving parts of the drill press.
Identifies common problems and their solutions for the drill press.
An itemized list of all replacement parts for the 17-inch drill press.
