Craftsman 137.219000 User Manual

Operator's ManuaM
.3
10 in. DRILL PRESS
With Laser Trac ®
Model No, 137,219000
CAUTION:
Before using this DriJl Press,
read this manual and follow
all its Safety Rules and
Operating Instructions
o Safety Instructions
o Installation
® Operation
o Maintenance
• Parts List
Customer He_p Line
1-80@-843-1682
Sears, Roebuck and Co., Hoffman Estates, IL 60179 USA
Visit our Oraftsman website: www.sears.com/craftsman
Part No. 137219000001

Craftsman 137.219000 Specifications

General

Model Number	137.219000
Type	Belt/Disc Sander
Motor	15 Amp
No Load Speed	5000 RPM
Cord Length	6 feet
Bevel Capacity	45 degrees

Summary

WARRANTY

PRODUCT SPECIFICATIONS

POWER TOOL SAFETY

GENERAL SAFETY INSTRUCTIONS

General safety guidelines for operating power tools.

DRILL PRESS SAFETY

ELECTRICAL REQUIREMENTS AND SAFETY

GROUNDING INSTRUCTIONS

Proper grounding for electrical safety.

GUIDELINES FOR EXTENSION CORDS

ASSEMBLY AND ADJUSTMENTS

ASSEMBLY INSTRUCTIONS

INSTALLING THE HEAD

INSTALLING THE CHUCK

Procedure for mounting the drill chuck.

MOUNTING DRILL PRESS TO WORK SURFACE

ADJUSTMENTS INSTRUCTIONS

BELT TENSION ADJUSTMENT

How to adjust the belt tension for proper operation.

OPERATION

BASIC DRILL PRESS OPERATIONS

Fundamental procedures for operating the drill press.

SPEEDS AND BELT PLACEMENT

ON/OFF SWITCH AND BIT INSTALLATION

Using the on/off switch and installing drill bits.

DRILLING TECHNIQUES

WORKPIECE POSITIONING AND TABLE TILTING

MAINTENANCE

TROUBLESHOOTING GUIDE