To Next PageTo Next Page
Need help?Do you have a question about the Craftsman 137.215360 and is the answer not in the manual?
Ensure guards are in place and functional for safe operation.
Always wear eye protection to prevent serious eye injury from thrown objects.
Ensure extension cords have 3-prong plugs and 3-pole receptacles for proper grounding.
Adjust belt tension to 1/4" to 1/2" deflection; avoid over-tightening.
Ensure the table is at a 90° angle to the sanding disc for accurate work.
Carefully press the abrasive disc firmly onto the sanding disc plate.
Tilt the table from 0° to 45° for various sanding tasks.
Follow steps to safely remove and install a new sanding belt, ensuring correct alignment.
Addresses issues like faulty switches, cords, relays, or motors.
General