To Next PageTo Next PageWhy is my Craftsman 151.39942 Lawn Mower hard to push?
Your Craftsman Lawn Mower might be hard to push because the grass is too high, the rear of the mower housing and blade are dragging in heavy grass, or the cutting height is set too low. Try raising the cutting height.
How to fix uneven grass cutting with my Craftsman 151.39942?
If your Craftsman Lawn Mower is cutting grass unevenly, it may be because the lawn is rough or uneven, or the cutting height isn't set correctly. Adjust the wheels to a higher position. Ensure all wheels are at the same cutting height for even cutting.
What to do if my Craftsman 151.39942 Lawn Mower is vibrating at a higher speed?
If your Craftsman Lawn Mower is vibrating at a higher speed, it could be due to an unbalanced blade or a bent motor shaft. You can try to balance the blade by grinding each cutting edge equally. If the motor shaft is bent, stop the motor, disconnect the power source, and inspect for damage. Have repairs made by a qualified service dealer using identical replacement parts before restarting.
General| Brand | Craftsman |
|---|---|
| Model | 151.39942 |
| Category | Lawn Mower |
| Language | English |
Details how to properly connect the electric motor to a power supply.
Provides guidance on selecting and using appropriate extension cords.
Step-by-step guide for assembling the mower handles.
Guide to adjusting the mower's cutting height.
Steps for starting and stopping the lawn mower.
Provides advice for effective and safe mowing practices.
Step-by-step instructions for replacing the mower blade.
How to check and ensure the mower blade is balanced.
Guidance on sharpening the mower blade for optimal performance.
