Craftsman 21513 - 2 x 42 in. Belt/6 Disc Sander User Manual

Operator's Manual I
x 42" Belt
SANDER
Model No.
351.215130
Sears, Roebuck and Co., Hoffman Estates, IL 60179 U.S.A.
www.sears.com/craftsman
20067.01 Draft (11/07/03)

Craftsman 21513 - 2 x 42 in. Belt/6 Disc Sander Specifications

General

Belt Size	2 x 42 in.
Disc Size	6 in.
Motor Power	1/3 HP
Disc Speed	3450 RPM
Voltage	120 V
Belt Tracking	Yes
Weight	27 lb
Motor	Induction

Summary

SAFETY RULES

BE PREPARED FOR JOB

Outlines necessary apparel and personal protection.

PREPARE WORK AREA FOR JOB

Instructions for ensuring a safe working environment.

TOOL SHOULD BE MAINTAINED

KNOW HOW TO USE TOOL

Advice on proper tool operation and safe practices.

INSTALLATION

POWER SOURCE

GROUNDING INSTRUCTIONS

Critical safety guidelines for proper grounding.

OPERATION

SAFETY PRECAUTIONS

Important safety measures to follow during operation.

ADJUSTING BELT TABLE

REPLACING ABRASIVE BELT

Step-by-step guide for replacing the abrasive belt.

TRACKING ABRASIVE BELT

Instructions for adjusting belt tracking for optimal performance.

ADJUSTING BELT PLATEN

ADJUSTING DISC TABLE ANGLE

REPLACING ABRASIVE DISC

Steps for replacing the abrasive disc.

MAINTENANCE

CLEANING

KEEP TOOL IN REPAIR

TROUBLESHOOTING

SYMPTOM / CAUSE / CORRECTION

Common problems, their causes, and suggested solutions.