To Next PageTo Next Page
Need help?Do you have a question about the Craftsman 247.204420 and is the answer not in the manual?
General| Brand | Craftsman |
|---|---|
| Model | 247.204420 |
| Category | Lawn Mower |
| Engine Type | Gas |
| Engine | Briggs & Stratton |
| Engine Displacement | 140 cc |
| Cutting Width | 21 inches |
| Deck Material | Steel |
| Cutting Height Positions | 6 |
| Start Type | Pull Start |
| Cutting Height | 1.25-3.75 inches |
| Wheel Size | 7 inches (front) |
Limited warranty for riding equipment parts against defects in material or workmanship.
Warranty for the battery (an expendable part) against defects in material or workmanship.
Extended warranties for the frame and front axle against defects.
Information on obtaining warranty service and product replacement options.
Conditions that void warranty coverage, such as commercial use or rental.
Specifies SAE 30 as the recommended engine oil.
Specifies unleaded gasoline as the required fuel type.
Section to record the tractor's model and serial numbers for reference.
General safety guidelines for operating the machine and handling the manual.
Warnings about chemicals known to cause cancer and reproductive harm.
Depicts and describes safety symbols and their meanings for safe operation.
Guidelines and warnings for operating the tractor on slopes to prevent tip-overs.
Safety measures to protect children from hazards during operation.
Guidelines and precautions for towing equipment with the tractor.
Safety guidelines to follow before performing any maintenance or repairs.
Precautions for handling gasoline to prevent injury and fire hazards.
Safety tips for general maintenance, cleaning, and repairs.
Warning against modifying the engine or governor settings.
Information on emission regulations and control systems for the engine.
Detailed descriptions of various safety symbols found on the machine.
Keep bystanders, helpers, children and pets at least 75 feet from the machine.
Keep hands and feet away from rotating parts or under the cutting deck.
Precautions regarding fire hazards, including hot surfaces and debris.
Importance of keeping safety devices (guards, shields, switches) in place and working.
Reinforces safety rules for operating on slopes, emphasizing the 15-degree limit.
Steps for preparing the tractor before assembly, including orientation notes.
Procedure for moving the tractor manually using the transmission bypass rod.
Step-by-step instructions for installing the operator's seat.
Instructions for installing the lower deck discharge chute deflector.
Steps for attaching the front bumper to the tractor frame using hardware.
Importance and procedure for checking tire pressure before operation.
Steps for correctly connecting the positive and negative battery cables.
Adjusting deck wheels for proper deck height and anti-scalp feature.
Instructions for filling fuel tank and checking engine oil before operation.
How to use the forward drive pedal to control speed and direction.
How to use the reverse drive pedal to control speed and direction.
How to use the brake pedal for stopping and parking.
How to adjust the operator's seat position forward or backward.
How to use the throttle and choke control lever for engine speed.
How to use the deck lift lever to raise and lower the cutting deck.
How to use the ignition switch to start, stop, and operate the tractor.
How to use the park brake and cruise control lever.
Important safety warnings before operating the tractor.
Explanation of the safety interlock system and its functions.
Step-by-step instructions for starting the tractor engine safely.
Step-by-step instructions for stopping the tractor engine safely.
How to operate the tractor in reverse with the cutting blades engaged.
General instructions for driving the tractor forward and backward.
Detailed instructions for safe operation on slopes, referencing the slope gauge.
Step-by-step instructions for setting the parking brake.
How to set and use the cruise control feature for maintaining speed.
How to engage the Power Take-Off for the cutting deck or attachments.
Important safety precautions to observe while mowing, including debris and slopes.
Safety guidelines to follow before performing any maintenance or service.
How to maintain the tractor's battery, including cleaning terminals.
General guidance for engine maintenance and referring to the engine manual.
Step-by-step instructions for changing the engine oil.
Instructions on how to clean the tractor, including warnings about water.
How and where to lubricate the tractor's various points.
How to lubricate the front wheel axles and rims with grease.
How to lubricate the deck wheels with grease.
How to lubricate pivot points on the drive system, brake, and lift linkage.
Instructions for adjusting the cutting deck for proper leveling and height.
How to adjust the deck for proper front-to-rear leveling.
How to adjust the deck for proper side-to-side leveling.
How to adjust the parking brake if it does not stop the tractor effectively.
Service and handling information for the tractor's battery.
Safety precautions and steps for jump starting the tractor's battery.
Guidelines for safely charging the tractor's battery.
Location and function of the tractor's electrical system fuse.
Step-by-step instructions for removing the cutting deck from the tractor.
Instructions for inspecting, removing, sharpening, and balancing cutting blades.
Step-by-step instructions for replacing the mower deck belt.
Information on replacing the tractor's transmission drive belt.
Steps for preparing the riding mower for storage to ensure longevity.
Steps for preparing the riding mower after a period of storage.
Common causes and remedies for the engine failing to start.
Common causes and remedies for erratic engine operation.
Causes and remedies for the engine overheating during operation.
Causes and remedies for the engine idling poorly.
Causes and remedies for excessive vibration during operation.
Causes and remedies for an uneven grass cut.
Explains emission control system warranty for California and United States.
Details Sears' warranty coverage for emission control parts defects.
Owner's responsibilities regarding required maintenance and presenting the unit.
Lists specific emission control parts covered by the warranty.
