How to fix an uneven cut with my Craftsman Lawn Mower?
If your Craftsman Lawn Mower is producing an uneven cut, here are a few things to check: * The deck might not be leveled properly. Perform a side-to-side deck adjustment. * The blade might be dull. Sharpen or replace the blade. * The tire pressure might be uneven. Check the tire pressure in all four tires.
Why does my Craftsman 247.288843 Lawn Mower engine run erratically?
If your Craftsman Lawn Mower engine runs erratically, it could be due to several reasons: * The unit might be running with the CHOKE activated. Deactivate the CHOKE. * Spark plug wires might be loose. Connect the spark plug wires. * The fuel line might be blocked, or the fuel is stale. Replace the fuel line, fill the tank with clean, fresh gasoline, and replace the fuel filter. * The vent in the gas cap might be plugged. Clear the vent or replace the cap if damaged. * There might be water or dirt in the fuel system. Drain the fuel tank and refill it with clean, fresh gasoline. * The air cleaner might be dirty. Replace the air cleaner paper element or clean the foam pre-cleaner, if equipped.
Why is my Craftsman Lawn Mower not mulching grass?
If your Craftsman Lawn Mower isn't mulching grass properly, consider these potential causes: * The engine speed might be too low. Place the throttle in the FAST (rabbit) position. * The grass might be wet. Avoid mulching when the grass is wet. * The grass might be excessively high. Mow once at a high cutting height, then mow again at the desired height or make a narrower cutting swath. * The blade might be dull. Sharpen or replace the blade.
What to do if my Craftsman 247.288843 engine overheats?
If your Craftsman Lawn Mower engine overheats, it could be due to: * Low engine oil level. Fill the crankcase with the proper amount and weight of oil. * Restricted airflow. Clean grass clippings and debris from around the engine’s cooling fins and housing.
Why does my Craftsman 247.288843 Lawn Mower engine idle rough?
If your Craftsman Lawn Mower engine idles roughly, consider the following: * The spark plug might be fouled, faulty, or have a gap that is too wide. Replace the spark plug and set the plug gap. * The air cleaner might be dirty. Replace the air cleaner element and/or clean the pre-cleaner.
Why is my Craftsman Lawn Mower vibrating excessively?
If your Craftsman Lawn Mower has excessive vibration, it could be due to: * A loose or unbalanced cutting blade. Tighten the blade and spindle. * A damaged or bent cutting blade. Replace the blade.
What causes a Craftsman 247.288843 Lawn Mower engine to hesitate at high RPM?
If your Craftsman Lawn Mower engine hesitates at high RPM, it might be because the spark plug gap is too close. Remove the spark plug and reset the gap.
Why won't my Craftsman 247.288843 start?
If your Craftsman Lawn Mower engine fails to start, there are several potential causes: * The PTO/Blade Engage lever might be engaged. Ensure it is in the disengaged (OFF) position. * The parking brake might not be engaged. Engage the parking brake. * Spark plug wires might be disconnected. Connect the wires to the spark plugs. * The Throttle/Choke control lever might not be in the correct starting position. Place it in the FAST position. * The choke might not be activated. Move the Throttle/Choke lever into the Choke position. * The fuel tank might be empty or contain stale fuel. Fill it with clean, fresh gasoline (less than 30 days old). * The fuel line might be blocked. Replace the fuel line and fuel filter. * The spark plugs might be faulty. Clean, adjust the gap, or r...
Covers non-expendable parts against defects in material or workmanship for two years from purchase.
Covers battery defects for 90 days from purchase; replacement battery supplied, labor is owner's responsibility.
Details how to obtain warranty service and what coverage includes/excludes.
Provides essential guidelines for safe operation, including user responsibilities and checks.
Details safe practices for operating the machine on slopes to prevent tip-overs and accidents.
Highlights safety risks related to children and operation of the equipment.
Provides crucial safety information for handling gasoline to prevent fire and explosion hazards.
Step-by-step instructions for correctly connecting the tractor's battery cables.
Instructions for attaching the steering wheel if it was not pre-assembled.
Guidance on how to properly secure the tractor seat.
Instructions on how to adjust the seat position for operator comfort and safety.
Details on how to engage and release the parking brake.
Instructions for using the ignition switch to start and stop the engine.
Step-by-step guide for safely starting the tractor's engine.
Provides guidance on safe driving practices and procedures.
Safety precautions and instructions for operating the tractor on sloped terrain.
A detailed schedule of required maintenance tasks and intervals.
Procedures for checking and changing engine oil and the oil filter.
Instructions for locating, draining, and replacing the fuel filter.
Guidance on removing, sharpening, balancing, and replacing cutting blades.
Steps to prepare the engine and fuel system for storage.
Details the warranty coverage for emission-related parts on outdoor equipment engines.
General| Cutting Width | 21 inches |
|---|---|
| Deck Material | Steel |
| Starting System | Recoil |
| Mulching Capability | Yes |
| Side Discharge | Yes |
| Bagging Capability | Yes |
| Engine Type | Gasoline |
| Cutting Height Range | 1.25 to 3.75 inches |
| Wheel Size | 11 inches |
To Next Page