Do you have a question about the Craftsman 247.288853 and is the answer not in the manual?
Engine Type | Gas |
---|---|
Cutting Width | 21 inches |
Deck Material | Steel |
Start Type | Recoil |
Drive Type | Self-propelled |
Cutting Height Adjustment | Dual-lever |
Speed | Variable |
Oil Capacity | 20 oz |
Mulching Capability | Yes |
Bagging Capability | Yes |
Side Discharge Capability | Yes |
Fuel Capacity | 1.3 quarts |
Cutting Height | 1.25 to 3.75 inches |
Wheel Size | 8 inches (front), 11 inches (rear) |
Covers all non-expendable parts against defects in material or workmanship for two years.
Provides details on obtaining free repair or replacement, contact information, and website.
Warns about chemicals in engine exhaust and battery components known to cause cancer.
Outlines essential steps for safe assembly, operation, and maintenance of the equipment.
Guidance on safely operating the tractor on slopes, including Do's and Don'ts.
Safety precautions regarding children's interaction with the tractor during operation.
Guidelines for safely towing equipment with the tractor, including weight limits.
Precautions for safely fueling the tractor to prevent fire and explosion hazards.
Covers general maintenance procedures, safety checks, and disposal regulations.
Information on the spark arrestor requirement for engines used in certain areas.
Emphasizes reading and following all manual instructions before operating.
Warns about severe injury from rotating blades; prohibits carrying passengers or children.
Warns that the machine may throw objects, causing serious personal injury.
Instructs to keep bystanders, helpers, children, and pets at least 75 feet away.
Warns against operating on slopes greater than 15 degrees.
Alerts that engine parts and muffler become extremely hot during operation.
Steps to measure slope angles and identify unsafe conditions.
Procedure for correctly connecting the tractor battery terminals.
Instructions for safely removing shipping braces before operating the mower.
Guide for attaching the steering wheel if it was not pre-assembled.
Guide on how to adjust the tractor seat for operator comfort and safety.
Recommended tire pressure settings for optimal tractor performance and safety.
Confirms the tractor conforms to American National Standards Institute safety standards.
Instructions for engaging and releasing the parking brake.
Explains the function and operation of the throttle and choke control lever.
Details on how to start, stop, and operate the tractor's ignition switch module.
Information on operating the tractor using the auto-drive pedal for forward and reverse movement.
Describes the positions of the shift lever and important operational notes.
Instructions for checking and maintaining the engine oil level.
Explains the function of the safety interlock system and its role in safe operation.
Guidance on adjusting the cutting deck height and deck wheel settings.
Step-by-step procedure for safely starting the tractor engine.
Procedure for safely shutting down the tractor engine after operation or striking an object.
Safe driving practices, including acceleration, braking, and turning.
Safety guidelines for operating the tractor on inclines and slopes.
Tips for effective mowing, including planning patterns and cutting techniques.
Provides a schedule for regular maintenance tasks to ensure optimal performance.
Covers procedures for maintaining the engine, including oil and filter changes.
Detailed steps for checking the engine oil level and viscosity.
Instructions for inspecting, draining, and changing the fuel filter.
Guidance on cleaning or replacing the air filter for engine performance.
Instructions for inspecting, cleaning, gapping, and replacing the spark plug.
Information on inspecting and replacing the muffler for safety and performance.
Procedures for cleaning the engine to prevent overheating and debris buildup.
Guidance on lubricating pivot points, linkages, and axles.
Instructions for cleaning the tractor and deck, with warnings about pressure washers.
General warnings and notes regarding making adjustments to the tractor.
Procedures for adjusting the cutting deck for proper height and side-to-side balance.
Safety precautions and procedures for jump-starting the tractor battery.
Instructions for safely removing, sharpening, balancing, and replacing cutting blades.
Note: Professional service recommended due to component removal and special tools.
Instructions for preparing the engine and fuel system for storage.
Resources for obtaining additional product manuals, expert answers, and maintenance plans.
Outlines consumer rights and obligations regarding the emission control system warranty.
Details specific provisions related to the emission control defects warranty coverage.
Details the emission control system warranty period and coverage for the engine.
Outlines owner's duties for required maintenance and presenting the engine for warranty service.
Covers designed, built, and equipped conformity to regulations and freedom from defects.
Lists specific parts covered under the emission control system warranty.