To Next PageTo Next Page
Need help?Do you have a question about the Craftsman 247.288870 and is the answer not in the manual?
General| Engine | Briggs & Stratton |
|---|---|
| Engine Displacement | 190cc |
| Cutting Width | 21 inches |
| Deck Material | Steel |
| Start Type | Recoil |
| Cutting Height | 1.25 to 3.75 inches |
| Cutting Height Positions | 6 |
| Speed Settings | Variable |
| Oil Capacity | 20 oz |
| Warranty | 2-year limited |
| Discharge Options | Side discharge, mulch |
| Fuel Tank Capacity | 0.95 quarts |
| Engine Type | 4-cycle OHV |
Outlines terms for full, limited, and extended warranties, and exclusions.
Section to record model number, serial number, and date of purchase.
Essential safety practices, general warnings, and specific hazards.
Critical guidelines for safe operation on inclines.
Specific safety rules for children, towing, and safe gasoline handling.
Safety for general service, engine modification, emissions, and spark arrestors.
Explains safety symbols and the use of the slope gauge.
Steps for removing shipping braces, attaching battery, and installing steering wheel.
Instructions for installing the seat and recommended tire pressure.
Identifies and describes all tractor controls and features.
Explains operation of speed control, shift lever, parking brake, and clutch-brake pedal.
Details ignition switch, throttle/choke, deck lift, and PTO engagement.
Proper fueling procedures and explanation of the safety interlock system.
Guidance on driving the tractor, stopping, and safe operation on slopes.
Tips for effective mowing, mulching, and deck lift lever usage.
A table outlining regular maintenance tasks and intervals.
Procedures for checking and changing engine oil and filter.
Instructions for draining fuel and replacing the fuel filter.
Steps for cleaning or replacing the air filter for engine health.
Maintenance procedures for the spark plug and muffler.
Guidelines for lubricating moving parts and adjusting deck level.
Instructions for side-to-side deck adjustment and changing belts.
Information on tire pressure, battery care, and jump starting procedures.
Instructions for battery charging, fuse checks, and cutting blade service.
Detailed steps for replacing deck and transmission drive belts.
Steps to prepare the engine and fuel system for storage.
Guidelines for cleaning and storing the tractor during the off-season.
A guide to diagnosing and resolving common engine and cutting issues.
Visuals of labels and their corresponding part numbers for identification.
Detailed list of parts with reference numbers and descriptions for ordering.
Explanation of emission durability periods and air index on the engine label.
Outlines owner's rights and responsibilities concerning emission warranty.
Defines manufacturer's and owner's roles in warranty service and maintenance.
Details warranty coverage for emission-related parts and exclusions.
Lists specific components covered under the emission control system warranty.
Information on the benefits and terms of the repair protection agreement.
Contact information for product support, troubleshooting, and service scheduling.
