M
maryatkinsonAug 31, 2025
Why Craftsman 247.375910 Lawn Mower has an uneven cut?
- AAnthony FlynnAug 31, 2025
An uneven cut with your Craftsman Lawn Mower is often due to a dull blade. Sharpen or replace the blade to resolve this issue.
To Next PageTo Next PageWhy Craftsman 247.375910 Lawn Mower has an uneven cut?
An uneven cut with your Craftsman Lawn Mower is often due to a dull blade. Sharpen or replace the blade to resolve this issue.
Why Craftsman Lawn Mower will not self propel?
If your Craftsman Lawn Mower won't self-propel, first check the belt to ensure it's properly installed on the pulleys and moving correctly. Debris clogging the drive operation can also be a cause; stop the engine, disconnect the spark plug boot, and clean out any debris. Inspect the belt for damage or wear and replace it if necessary. Finally, the drive control may be out of adjustment; in this case, you should adjust the drive control.
Why Craftsman Lawn Mower engine runs erratic?
If your Craftsman Lawn Mower engine is running erratically, start by checking the spark plug boot to ensure it's connected and tightened. Stale fuel can also cause this issue, so refill the tank with clean, fresh gasoline. Make sure the vent in the gas cap isn't plugged; clear it if necessary. Water or dirt in the fuel system can also lead to erratic running; run the engine until it stops from lack of fuel, then refill with fresh fuel. A dirty air cleaner could be the culprit. Finally, a blocked fuel line could be the issue; in this case, contact your Sears Parts & Repair Center to have the fuel line cleaned.
Why does my Craftsman Lawn Mower leave an uneven cut?
An uneven cut from your Craftsman Lawn Mower is likely due to a dull blade. Sharpen or replace the blade to resolve this.
What to do if my Craftsman 247.375910 will not self propel?
If your Craftsman Lawn Mower won't self-propel, there are a few things to inspect. Make sure the belt is properly installed on the pulleys and moves freely. Debris might be clogging the drive mechanism; stop the engine, disconnect the spark plug boot, and clean out any debris. Check the belt for damage or wear and replace it if needed. Finally, the drive control may be out of adjustment.
How to start a Craftsman 247.375910 that won't start?
If your Craftsman Lawn Mower engine fails to start, several issues could be the cause. First, ensure the blade control is engaged. Check that the spark plug boot is connected. The fuel tank may be empty or contain stale fuel, so fill it with fresh gasoline. If your mower has a primer, prime the engine as instructed. Inspect the spark plug; it may need cleaning, gap adjustment, or replacement. If the engine is flooded, wait a few minutes before restarting. If none of these work, the fuel line may be blocked, and you should contact a service center to have it cleaned.
What to do if Craftsman Lawn Mower engine overheats?
General| Brand | Craftsman |
|---|---|
| Model | 247.375910 |
| Category | Lawn Mower |
| Language | English |
Instructions for operating the mower safely, including operator responsibilities and area inspection.
Guidelines for safe mowing on slopes, including maximum angle and mowing direction.
Safe practices for handling gasoline, including storage, fueling, and avoiding ignition sources.
Explanation of the blade control and premium drive control functions for operating the mower.
Instructions on how to start the mower's engine using the recoil starter.
Procedures for filling the engine with gasoline and oil, including checking oil level.
Detailed steps for checking the engine oil level using the dipstick.
Specifications for usable gasoline and safety warnings for refueling.
Step-by-step guide on how to start and stop the mower's engine safely.
A schedule outlining required maintenance tasks based on time or hours of use.
Regular checking and changing of engine oil to maintain engine health.
Troubleshooting common problems like engine failure to start or erratic running.
Diagnosing and resolving issues like engine overheating or occasional skipping.
Solutions for problems such as poor engine idling or excessive vibration during operation.
