Some of these following symbols may be used on this tool. Please study them and
learn their meaning, Proper interpretation of these symbols will allow you to operate
the tool better and more safely.
SYMBOL NAME DESIGNATION / EXPLANATION
V
A
Hz
W
rnin
,-,,_,
no
[]
_Jmin
@
@
0
A
@
@
@
®
Volts
Amperes
He rtz
Watt
Minutes
Alternating Current
Direct Current
No Load Speed
Class I1Construction
Per Minute
Wet Cond tons Alert
Read the Product Manual
Eye Protection
Safety Alert
No Hands Symbol
No Hands Symbol
No Hands Symbol
Voltage
Current
Frequency (cycles per second)
Power
Time
Type of current
Type or a characteristic of current
Rotational speed, at no load
Double-insulated construction
Revolutions. strokes, surface speed.
orbits, etc.. per minute
Do not expose to rain or use in damp
locations,
To reduce the risk of in ury, user must
read and understand product manua
before using this producL
Always wear safety goggles or safety
glasses with side shields and a fuIFface
shield when operating this product.
Precautions that involve your safety,
Failure to keep your hands away from
the blade will result in serious personal
injury.
Failure to keep your hands away from
the blade will result in serious personal
injury.
Failure to keep your hands away from
the blade will result in serious personal
injury.
Failure to keep your hands away from
the blade will result in serious personal
injury
No Hands Symbol
To reduce the risk of injury or damage,
Hot Surface avoid contact with any hot surface,
28580 Manual Revised_07-0228 Page4
To Next Page
Loading...
Need help?
General
