FULL ONE YEAR WARRANTY ON CRAFTSMAN ELECTRIC DRILL
If this Etectdc Drill fat_s to give complete satisfaction w_thtn one year from the date of purchase
RETURN tT TO THE NEAREST SEARS SERVtCE CENTER/DEPARTMENT THROUGHOUT THE UNITED
STATES and Sears will repair It, free of charge,
If this electric drill Is used for commercial or rental purposes this warJ:antyapptlas for only 90 days from
the date of purchase.
This warranty gives you specific tegat rights, end you may atso have other rights which vary from state
to state_
SEARS, ROEBUCK AND CO,
DEPT. 731CR,W
SEARS TOWER
CHICAGO. IL 60684
INTRODUCTION
DOUBLE INSULATION is a concept In safety, In elec,
trio power tools, which eliminates the need for the
usual three wire grounded power cord and grounded
supply system. Wherever there is electric current In
the tool there are two complete sets of insulation to
protect the user. Alt exposed metai parts are lsotated
Item the Internal metal motor components with pro..
tectlng InsuIatlon
RULES FOR SAFE OPERATION
IMPORTANT -- Servicing of a tool with double fn-
su_ation requires extreme care and knowledge of the
system and should be performed cnty by e qualified
service technician. For service we suggest you
return the tool to your nearest Sears Store for repair,
Always use original factory replacement parts whoa
servicing.
READ ALL INSTRUCTIONS
1_ KNOW YOUR POWER T'OOL -- Read owner's manual carefully. Learn its ap-
plications and limitations as weft as the specific potential hazards related to
this tool.,
2, GUARD AGAINST ELECTRICAL SHOCK BY PREVENTING BODY CONTACT
WITH GROUNDED SURFACES_ For example: Pipes, radiators, ranges, refrig-
erator enclosures.
3, KEEP GUARDS IN PLACE and in working order.
4 KEEP WORK AREA CLEAN, Cluttered areas and benches Invite accidents.
5, AVOID DANGEROUS ENVIRONMENT. Don't use power tool in damp or wet
locations or expose to rain_ Keep work area well lit.
6_ KEEP CHILDREN AWAY. Atl visitors should wear safety glasses and be kept
a safe distance from work area. Do not let visitors contact tool or extension
cord.
7_ STORE IDLE TOOLS. When not in use, tools should be stored In a dry, high or
locked-up place -- out of the reach of children,
8 DON'T FORCE TOOL It will do the Job better and safer at the rate for which it
was designed.
9 USE RiGRT TOOL. Don't force small tool or attachment to do the job of a heavy
duty tool Don't use toot for purpose not intended - for example - Don t use
a clrcutar saw for cutting tree limbs or logs=
10 WEAR PROPER APPAREL. No loose clothing or Jeweiry to get caught In moving
parts. Rubber gloves and non.skid footwear are recommended when working
outdoors, AJso, wear protective hair covering to contain long hair
11, USE SAFETY GLASSES with all toots. Also face or dust mask if operation Is
dusty_
Page 2
To Next Page
Loading...
Need help?
General