KNOW YOUR SANDER
See Figure 1.
Before attempting to use your sander, familiarize yourself
with all operating features and safety requirements.
Your sander is suitable for sanding with coarse, medium,
and fine grit sandpaper. It will produce a fine scratch free
finish when used to sand with the grain on wood surfaces.
It has also been designed so that sanding flush to corners
is possible.
APPLICATIONS
(Use only for the purposes listed below)
• Sanding on wood surfaces.
• Removing rust from and sanding steel surfaces.
SWITCH
This tool is equipped with a slide switch located on the
rear handle of your sander. To turn sander ON, slide the
switch forward as shown in Figure 1. Slide the switch
back to turn your sander OFF. Be sure sander switch is in
OFF position before connecting to power supply source.
DUSTLESS FEATURE (Model No. 315.116321 )
A dust bag assembly and a vacuum hose adapter is
included with your sander. Each provide a dust collection
system for your sander.
TOTURN
SANDERON
ELECTRICAL CONNECTION
Your sander has a precision built electric motor. It should
be connected to a power supply that is 120 volts, 60 Hz,
AC only (normal household current). Do not operate
this tool on direct current (DC). A substantial voltage drop
will cause a loss of power and the motor will overheat. If
your tool does not operate when plugged into an outlet,
double-check the power supply.
PRODUCT SPECIFICATIONS
No Load Speed
Rating
Input
Model No. 315.116311
Model No. 315.116321
12,000 opm
120Volts, 60 Hz, AC only
1.8 Amperes
2.0 Amperes
Orbit Diameter
1/16 in.
Size of Paper 1/3 sheet
Paper Type
Dustless
Vacuum Hose Adaptor
Non-Adhesive Sandpaper
Adhesive Sandpaper
Model No. 315.116321 Only
Model No. 315.116321 Only
_k WARNING: Do not allow familiarity with your
sander to make you careless. Remember that a
careless fraction of a second is sufficient to inflict
severe injury.
SWITCH
SWITCH REAR
HANDLE
TO TURN
SANDEROFF
VACUUMHOSEADAPTER
(MODELNO.315.116321)
HANDLE
PLATEN
DUSTBAGASSEMBLY
(MODELNO.315.116321)
PAPERCLAMP LEVER Fig. 1
6
To Next Page
Loading...
