EasyManua.ls Logo

Craftsman 315 SERIES 139.53939D User Manual

Craftsman 315 SERIES 139.53939D
80 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
GARAGE DOOR OPENER
ABRIDOR DE PUERTA DE COCHERA
For Residential Use Only/Sólo para uso residencial
Model/Modelo 139.53939D
Sears, Roebuck and Co., Hoffman Estates, IL 60179 U.S.A
www.sears.com/craftsman
Owners Manual/Manual Del Propietario
ENGLISH ESPAÑOL
Read and follow all safety rules
and operating instructions before
first use of this product.
Fasten the manual near the garage
door after installation.
Periodic checks of the opener are
required to ensure safe operation.
Leer y seguir todas las reglas de
seguridad y las instrucciones de
operación antes de usar este
producto por primera vez.
Guardar este manual cerca de la
puerta de la cochera.
Se deben realizar revisiones
periódicas del abridor de puertas
para asegurar su operación
segura.

Table of Contents

Question and Answer IconNeed help?

Do you have a question about the Craftsman 315 SERIES 139.53939D and is the answer not in the manual?

Craftsman 315 SERIES 139.53939D Specifications

General IconGeneral
BrandCraftsman
Model315 SERIES 139.53939D
CategoryGarage Door Opener
LanguageEnglish

Summary

Preparing Your Garage Door

Assembly

Installation

Important Installation Instructions

Presents critical safety warnings and essential instructions to follow before and during garage door opener installation.

Determine the Header Bracket Location

Explains how to determine the correct mounting location for the header bracket based on door type and travel height.

Install the Header Bracket

Provides instructions for securely mounting the header bracket to either the wall or the ceiling.

Attach the Rail to the Header Bracket

Details the process of connecting the garage door opener rail to the installed header bracket using a clevis pin.

Position the Opener

Guides on positioning the opener unit correctly relative to the garage door for both sectional and one-piece doors.

Hang the Opener

Instructs on how to securely hang the opener motor unit from structural supports using hanging brackets.

Electrical Requirements

Outlines the electrical requirements, including grounding and permanent wiring procedures, for the garage door opener.

Install The Protector System® (Safety Sensors)

Explains the importance and procedure for installing the safety reversing sensors to prevent injury from a closing door.

Fasten the Door Bracket

Instructs on how to attach the door bracket to the garage door, including considerations for reinforcement.

Connect Door Arm to Trolley

Details how to connect the door arm sections to the trolley and door bracket for sectional doors.

Adjustment

Program the Travel Limits

Explains how to set the open and closed travel limits for the garage door opener using control buttons.

Setting the Force

Guides on adjusting the force settings required to open and close the garage door properly.

Test the Safety Reversal System

Details how to test the safety reversal system by checking its response to an obstruction.

Operation

Care of Your Opener

Battery Backup

Troubleshooting

Programming

Related product manuals