To Next PageTo Next Page
Need help?Do you have a question about the Craftsman 316.79191 and is the answer not in the manual?
Explains safety symbols and provides general warnings for safe operation.
Details safe practices for using the trimmer, including handling and maintenance.
Identifies and labels the various parts of the trimmer for user reference.
Describes the primary uses of the trimmer, such as cutting grass and weeds.
Details the terms and conditions of the product's limited warranty coverage.
Explains the benefits and purchase options for extended repair protection plans.
Step-by-step guide on how to properly adjust the D-handle for optimal grip.
Covers recommended oil types, initial filling, and checking oil levels.
Details recommended fuel, blended fuels, additives, and the fueling process.
Step-by-step instructions for starting the engine when it is cold.
Guidance for restarting the engine when it is already warm.
Instructions on how to safely turn off the engine.
How to hold and operate the trimmer correctly for safety and efficiency.
Tips for optimal trimming, including line advance and decorative trimming.
How to install new trimmer line into the Rapid Rewind cutting head.
Steps to clean the Rapid Rewind cutting head when it's jammed or dirty.
Overview of the maintenance schedule and required services.
Procedures for checking and changing the engine oil.
Instructions for cleaning and maintaining the air filter for optimal performance.
Covers idle speed adjustment and rocker arm clearance checks.
Steps for replacing spark plug and maintaining the spark arrestor.
Guidelines for cleaning the unit, short-term and long-term storage, and transport.
Common causes and solutions for the engine failing to start or idle.
Troubleshooting tips for acceleration issues, loss of power, or stalling during cutting.
Technical specifications for the engine and cutting attachment.
Details the warranty for emission control systems in California and other states.
Specifics on the evaporative emission control system warranty and requirements.
Visual representation of all replaceable parts with corresponding numbers.
A detailed list of part numbers and descriptions for ordering replacements.
General