EasyManua.ls Logo

Craftsman 316.79199 - User Manual

Craftsman 316.79199
32 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
Sears, Roebuck and Co., Hoffman Estates, IL 60179, U.S.A.
Visit our website: www.sears.com/craftsman
CAUTION: Before using this
product, read this manual and
follow all safety rules and
operating instructions.
Operator’s Manual
4-Cycle
WEEDWACKER
®
GAS TRIMMER
Model No. 316.791990
• SAFETY
• ASSEMBLY
• OPERATION
• MAINTENANCE
• PARTS LIST
• ESPAÑOL, P. 15
P/N 769-03874 2/08

Questions and Answers

  • J
    Jacqueline ClarkeJul 30, 2025
    Why won't my Craftsman 316.79199 start?
    • M
      Michael LarsonJul 30, 2025
      If your Craftsman Trimmer won't start, there are several potential causes: * The fuel tank may be empty, in which case you should fill it with fuel. * The primer bulb may not have been pressed enough; press it fully and slowly 10 times. * The fuel may be old; drain the gas tank and add fresh fuel. * The spark plug may be fouled; replace or clean it. * The spark arrestor may be plugged; clean or replace it.
  • M
    Mr. Patrick RoseAug 6, 2025
    What to do if Craftsman 316.79199 Trimmer engine will not accelerate?
    • Y
      Yolanda WallAug 6, 2025
      If your Craftsman Trimmer engine will not accelerate, consider these potential issues: * Old fuel: Drain the gas tank and add fresh fuel. * Cutting attachment bound with grass: Stop the engine and clean the cutting attachment. * Dirty air filter: Clean or replace the air filter. * Plugged spark arrestor: Clean or replace the spark arrestor. * Improper carburetor adjustment: It is recommended to take the trimmer to Sears or an authorized service dealer for an adjustment.
  • R
    Ryan WhitakerAug 13, 2025
    Why does my Craftsman 316.79199 engine lack power or stall when cutting?
    • D
      Derek ElliottAug 13, 2025
      If your Craftsman Trimmer engine lacks power or stalls when cutting, the possible causes are: * Old fuel: Drain the gas tank and add fresh fuel. * Improper carburetor adjustment: It is recommended to take the trimmer to Sears or an authorized service dealer for an adjustment.
  • L
    luiswilliamsAug 22, 2025
    How to fix a Craftsman 316.79199 Trimmer that will not idle?
    • A
      austin85Aug 22, 2025
      If your Craftsman Trimmer will not idle, the following issues may be the cause: * A plugged air filter: Clean or replace the air filter. * Old fuel: Drain the gas tank and add fresh fuel. * Improper idle speed: Adjust according to the Idle Speed Adjustments section.

Summary

Rules for Safe Operation

Safety Symbols Meaning

Explains danger, warning, and caution symbols and their meanings.

Important Safety Instructions

Essential guidelines for safe operation before starting the unit.

Safety Warnings for Gas Units

Specific precautions for operating gasoline-powered units safely.

Assembly Instructions

Oil and Fuel Information

Adding Oil to Crankcase

Instructions for filling the crankcase with oil for initial use.

Recommended Fuel Type

Details the type of gasoline required and precautions for blended fuels.

Starting and Stopping Instructions

Starting Instructions

Step-by-step guide on how to start the gas trimmer engine.

Stopping Instructions

Procedure for safely shutting down the engine.

Operating Instructions

Maintenance and Repair Instructions

Line Replacement

Guide on how to replace the trimmer line in the cutting head.

Maintenance Schedule

Table outlining required maintenance tasks and their frequencies.

Checking the Oil Level

Procedure for verifying the engine oil level before operation.

Troubleshooting

Engine Starting Problems

Solutions for issues like engine not starting or failing to idle.

Engine Performance Issues

Solutions for problems with acceleration, power loss, or stalling.

Specifications

California; EPA Emission Control Warranty Statement

Craftsman 316.79199 Specifications

General IconGeneral
BrandCraftsman
Model316.79199
CategoryTrimmer
LanguageEnglish

Related product manuals