To Next PageTo Next Page
Need help?Do you have a question about the Craftsman 320.48293 and is the answer not in the manual?
General| Laser Wavelength | 635nm |
|---|---|
| Laser Type | Red Beam |
| Laser Class | Class II |
| Self-Leveling Range | ±4 degrees |
| Battery Type | 2 x AA |
Explains the meaning and usage of safety alert symbols like DANGER, WARNING, and CAUTION.
Describes informational messages related to equipment or property damage prevention.
Details critical safety measures and warnings specifically for the laser functionality of the level.
Provides an overview and identification of the level's components and features with diagrams.
Explains the various icons displayed on the digital level's LCD screen.
Lists the technical data and specifications of the digital laser level.
Step-by-step guide on how to install or replace batteries in the digital level.
Instructions on operating the power button and interpreting the LCD display for measurements.
Explains how to perform horizontal and plumb measurements using bubble vials and LCD.
Details how to measure the pitch of a surface using the level.
Describes how to measure various angles with the digital level.
Explains how to measure the slope of a surface in percent for drainage applications.
Guide on using the laser beam for alignment and extending leveling lines.
Instructions for mounting and using the level with a tripod for extended reach.
How to hold readings and recall stored measurements from the level's memory.
Explains how to change measurement units (degrees, pitch, slope) using the conversion button.
Details on performing absolute and relative angle measurements.
Information about the compatible Craftsman tripod accessory for the level.
