SAFETY PRECAUTIONS FOR LASERS cont.
5 DO NOT operate the LaserTrac TM level around children or allow children to
operate the toolo Serious eye injury could result.
6, ALWAYS turn the LaserTrac TM level off when not in use° Leaving the tool on
increases the risk of someone inadvertently staring into the laser beam.
7 DO NOT operate the LaserTrac Level in combustible areas such as in the
presence of flammable liquids, gasses or dusL
8_ DO NOT use on surfaces such as sheet steel that have a shiny, reflective
surface. The shiny surface could reflect the beam back at the operator. Be aware
that laser light reflected off a mirror or any other reflective surfaces can also
be dangerous
9 DO NOT attempt to modify the performance of this laser device [n any way.
This may result in a dangerous exposure to laser radiation.
10, ALWAYS use only the accessories that are recommended by Sears for use
with the Laser Trac TM Level with this product. Use of accessories that have been
designed for use with other laser tools could result in serious injury°
11, DO NOT use the Laser Trac Level for any purpose other than those outlined
in this manual. This could result in serious injury
12. For further information regarding lasers, refer to ANSI-Z136.1 the STANDARD
FOR THE SAFE USE OF LASERS, available from the Laser institute of America
(407) 380-1553
13.
14
!5.
I6,
17_
ALWAYS USE two "AAA" size batteries Use of any other batteries may create
a risk of fire°
INSERT the batteries correctly. Match the polarities, positive (+) to positive and
negative (-) to negative, as marked inside battery compartment.
DO NOT short battery terminals,
DO NOT MIX old and new batteries. If batteries are weak, replace both of them
with two new batteries These new batteries should match each other in brand
and type.
Remove dead batteries immediately and dispose of them according to your
local ordinance°
18. NEVER dispose of batteries in fire.
19o Keep batteries out of reach of children. They are not playthings,
20. Remove batteries and store separately if level will not be used for several days,
To Next Page
