To Next PageTo Next Page
Need help?Do you have a question about the Craftsman 358.341141 and is the answer not in the manual?
General| Engine Type | 2-cycle |
|---|---|
| Displacement | 42cc |
| Bar Length | 16 inches |
| Chain Pitch | 3/8 in |
| Chain Gauge | 0.050 inches |
| Type | Gasoline |
Details the one-year warranty for defects in material or workmanship.
Explains how and where to obtain warranty service.
Essential precautions for electric gardening appliances.
Recommends specific protective gear for safe operation.
Guidelines for user condition, children, and keeping areas clear.
Crucial safety information regarding electrical hazards.
Information and methods to prevent dangerous kickback.
Proper grip and stance for controlling the saw during operation.
Describes built-in features designed to reduce kickback hazards.
Explains the double insulation system for electrical shock protection.
Lists the items included in the product packaging.
States that the saw is fully assembled and requires no further assembly.
Familiarize yourself with controls and adjustments.
How to operate the power switch and its safety lock.
Recommendations for choosing the correct extension cord gauge.
Function of the bar oil cap and oiling the chain.
How to use the screw to adjust chain tension.
Normal chain stretch and recommended tension checks.
How to secure the extension cord to the power cord.
Essential checks and safety information before initial use.
Requirements for lubricating the bar and chain.
Step-by-step instructions for starting the electric chainsaw.
Advice for proper and safe operation.
Methods and precautions for safely felling trees.
Techniques for cutting fallen trees into manageable logs.
How to handle a saw that becomes pinched in a log.
Proper methods for cutting logs on a support stand.
Techniques for cutting logs without a support.
Safe methods for removing branches from felled trees.
Tasks the user must perform to maintain the unit.
Guidance on inspecting parts for damage or wear.
Safe techniques and limits for pruning branches.
Step-by-step guide for checking and adjusting chain tension.
How to determine if the chain is sharp and needs sharpening.
Conditions requiring guide bar maintenance and inspection.
Information on sharpening the chain, tools, and professional services.
Instructions for safely replacing the chainsaw chain.
Preparing the unit for long-term storage.
Troubleshooting steps for when the chain fails to move.
Diagnosing and fixing issues causing rough cutting.
Resolving problems where the chain stops mid-cut.
Troubleshooting lubrication issues for bar and chain.
Identifying causes for uneven cutting angles.
