To Next PageTo Next Page
Need help?Do you have a question about the Craftsman 358.341190 and is the answer not in the manual?
General| Engine Type | 2-Cycle |
|---|---|
| Engine Displacement | 42cc |
| Bar Length | 18 inches |
| Oil Capacity | 6.8 oz |
| Type | Gas Chainsaw |
| Chain Pitch | 3/8 in |
| Chain Gauge | 0.050 inch |
Details the warranty terms and conditions for Craftsman products, including limitations and coverage periods.
Outlines preparatory steps and considerations before operating the chain saw safely.
Provides essential guidelines for the safe operation of the chain saw, emphasizing two-handed use and clear work areas.
Details procedures and checks for keeping the saw in optimal working condition, including handle cleanliness and fastener tightness.
Covers crucial safety precautions related to the use of electricity with the tool, including cord use and outlet compatibility.
Explains rotational kickback, pinch-kickback, and pull-in phenomena caused by chain contact.
Offers methods and precautions to minimize the risk of kickback during operation, such as maintaining chain sharpness.
Provides advice on proper grip, stance, and body positioning for optimal saw control during operation.
Highlights built-in safety features designed to mitigate kickback hazards, like hand guards and low kickback chains.
Explains the double insulation system for electrical safety, ensuring no grounding means are provided.
Confirms the unit is fully assembled and no additional assembly is needed upon receiving it.
Familiarizes users with the components and controls of the chain saw through illustrations and labels.
Details the connection of the chain saw to the power source via an approved extension cord.
Provides guidance on using the saw, including extension cord selection and attachment for safe operation.
Covers essential pre-operation checks, including guide bar and chain lubrication and oil levels.
Explains the importance of checking and adjusting chain tension, especially for new chains.
Instructions on how to safely turn off the chain saw by releasing the trigger switch.
Step-by-step guide on how to safely start the chain saw, including grip and trigger operation.
Information on the chain brake's function and operation, designed to stop the chain if kickback occurs.
Details how to check and operate the chain brake's functions, including inertia activation.
Provides practical advice for efficient and safe chain saw usage, including cutting techniques.
Covers preparation, work area clearing, assessing tree lean, and identifying hazards.
Details the notch method for felling trees six inches or larger, including cut placement and hinge formation.
Explains how to cut fallen trees into desired log sizes, with important points on log handling.
Provides methods for cutting logs, including handling pinched saws and using support stands.
Offers guidance on safely removing branches from felled trees, focusing on cuts at shoulder height.
Outlines user duties for performing regular maintenance tasks and keeping the unit in good condition.
Details how to inspect the unit for damaged or worn components like switches and power cords.
Guides on checking for loose screws, knobs, and other fasteners to ensure unit integrity.
Explains how to check and adjust the chain tension for safety and performance, a critical daily task.
Provides criteria for guide bar maintenance, including signs of wear and when replacement is necessary.
Covers checking and maintaining bar and chain oil levels before and during operation for longevity.
Details post-use inspection for damaged parts and cleaning procedures for the unit and labels.
Explains the process and requirements for sharpening the saw chain, recommending professional service.
Outlines the procedure for replacing the saw chain, emphasizing safety precautions and correct chain type.
Step-by-step instructions for fitting the guide bar and saw chain onto the unit.
Refers to chain tension adjustment procedures detailed in the Maintenance section.
Provides guidelines for storing the chain saw during off-season periods or when not in use for 30+ days.
