To Next PageTo Next Page
Need help?Do you have a question about the Craftsman 358.797750 and is the answer not in the manual?
Details the terms of the manufacturer's one-year warranty for the edger.
Lists items and conditions not covered by the warranty, such as normal wear and tear.
General safety instructions and warnings for operating the edger.
Guidelines for personal protective equipment and safe operating practices for the user.
Instructions for inspecting and maintaining the edger for safe operation.
Specific safety advice for the edging operation, including hazard awareness.
Critical safety instructions for handling and using fuel, including warnings.
Lists items found in the carton and tools required for assembly.
Step-by-step guide for assembling the edger's tube components.
Identifies and explains the function of various edger controls and parts.
Preparation steps and important information before fueling or starting the engine.
Instructions on mixing fuel, recommended oil, and safe fueling practices.
Procedures for starting, stopping, and handling engine starting issues like flooding.
Instructions on how to perform the edging task and adjust cutting depth.
Outlines user duties and recommended maintenance tasks and intervals.
Lists tasks like cleaning air filter, checking parts, and replacing spark plug.
Guidance on inspecting, maintaining, and replacing the edger blade.
Instructions for yearly replacement of the spark plug for better engine performance.
Detailed instructions and warnings for adjusting the engine's carburetor.
Tips for diagnosing and resolving common engine performance issues.
Initial settings for the carburetor mixture screws.
Procedures for adjusting idle speed and fuel mixture for optimal performance.
General guidance on preparing the unit for storage.
Steps for cleaning and preparing the unit for long-term storage.
Instructions for draining fuel and preparing the fuel system for storage.
Instructions for preparing the internal engine for storage.
Identifies causes and remedies for engine not starting or running erratically.
Addresses problems like poor acceleration, excessive smoke, and blade operation.
General