To Next PageTo Next Page
Need help?Do you have a question about the Craftsman 247.762460 and is the answer not in the manual?
Key safety alerts and warnings for operating the equipment, including danger and warning notices.
Warning regarding chemicals known to cause cancer and reproductive harm in California.
Outlines the operator's duty to read and follow instructions for safe use of the machine.
Essential guidelines for safe operation, emphasizing caution, proper use, and awareness.
Procedures for safely handling gasoline to prevent fire and explosion hazards.
Measures to protect children from hazards associated with lawn edger operation.
Warnings against modifying the engine and information on emission control systems.
Explains the meaning of various safety symbols found on the product and in the manual.
Instructions for assembling and securing the main handle of the edger.
Steps to properly route and secure the control cable to the handle assembly.
Details on connecting the Z-fitting of the control cable to the handle.
Guide for routing and attaching the blade depth control cable to the lever.
Instructions for installing and routing the starter rope guide.
How to adjust the blade angle for different edging or trenching tasks.
How to use the blade control lever to operate and stop the edger.
Explains how to adjust the right rear wheel for edging along curbs.
Details the function of the lever that controls the cutting depth.
Describes how to set the blade angle for beveling or trenching.
Information on using the primer and recoil starter to start the engine.
Procedures for filling the engine with the correct type and amount of oil and fuel.
Specifications for the type of gasoline to use, including octane and ethanol content.
Step-by-step guide on how to start the edger engine.
Simple procedure for safely stopping the engine and blade.
Instructions on how to perform edging, including depth adjustments.
How to use the curb wheel adjustment for edging next to curbs.
Method for setting the blade angle for bevel cuts.
Guidance on using the optional trenching feature for creating wider paths.
A schedule outlining required maintenance tasks at different intervals.
General advice for maintaining the edger and avoiding warranty voidance.
How to inspect, gap, and replace the spark plug for optimal performance.
Instructions for cleaning and replacing the air cleaner element.
Procedure for checking the engine oil level before operation.
Steps for draining and refilling the engine oil.
How to keep the engine clean for proper operation and cooling.
Details on lubricating wheels, pivot points, and bearing blocks.
Guidelines for inspecting and replacing the edger blade.
Instructions for replacing the drive belt.
Steps to prepare the engine for long-term storage to prevent fuel system issues.
How to clean and prepare the entire unit for storage to prevent rust.
A guide to diagnosing and resolving common operational issues with the edger.
A list of part numbers and their descriptions for ordering replacements.
Visual diagrams illustrating the components of the engine.
Detailed illustrations of various engine parts and assemblies.
Depictions of assembled engine sections and sub-assemblies.
Parts specific to the engine's carburetor and air cleaner system.
Comprehensive list of engine components with corresponding part numbers.
Continuation of the engine component list with part numbers.
Details the owner's responsibilities for maintenance and proper use of the engine.
Explains warranty coverage and exclusions for emission control parts.
Specifies the duration of the warranty for covered emission control parts.
Information on filing claims and parts not covered by the emission warranty.
Outlines required maintenance for the engine to maintain warranty validity.
Explains coverage for engine component failures due to warranted part failure.
Outlines the advantages and services included in the extended protection agreement.
Details how to easily schedule service appointments for covered repairs.
Lists conditions and situations not covered by the repair protection agreement.
Contact details for in-home repair services for appliances and equipment.
Contact information for carrying in items like vacuums and electronics for repair.
Provides phone numbers for purchasing a product protection agreement.
General