To Next PageTo Next Page
Need help?Do you have a question about the Craftsman 358.799240 and is the answer not in the manual?
General| Type | Gas Trimmer |
|---|---|
| Engine Displacement | 25cc |
| Engine Type | 2-cycle |
| Cutting Swath | 17 inches |
| Shaft Type | Straight |
General safety guidelines for the operator.
Safety concerning tool upkeep and maintenance.
Precautions for handling and using fuel.
Safety measures during the cutting process.
Safe practices for moving and storing the unit.
Overview of the trimmer's capabilities and features.
Steps for safely removing and checking contents from the carton.
List of items included in the product packaging.
Guidance on using included hardware during assembly.
Steps to take before starting the assembly process.
Instructions for attaching and adjusting the assist handle.
Procedure for installing the safety shield.
Essential checks and fuel safety before engine ignition.
Correct procedure for mixing fuel and oil.
Step-by-step guide for starting the trimmer engine.
Guidance on how to operate the trimmer effectively.
Safety precautions specific to using the line trimmer.
Technique for cutting grass and weeds with the line.
Method for removing unwanted vegetation close to the ground.
Step-by-step guide for fitting a new spool of cutting line.
Instructions for winding line onto an existing spool.
Solutions for common line feeding issues.
Safety precautions for performing maintenance tasks.
Detailed procedure for replacing the starter rope.
Steps required before adjusting the carburetor.
How to set the engine's idle speed correctly.
Verifying smooth engine acceleration after adjustments.
Checking engine response when throttle is released.
Fine-tuning fuel/air mixture for optimal performance.
Instructions for cleaning or replacing the air filter.
Guidance on replacing the spark plug.
Procedures for preparing the engine for storage.
Cleaning and preparing the trimmer for long-term storage.
