To Next PageTo Next Page
Need help?Do you have a question about the Craftsman 358.799260/32cc and is the answer not in the manual?
General| Engine Displacement | 32cc |
|---|---|
| Power Source | Gas |
| Weight | 12.5 lbs |
| Cutting Width | 17 inches |
| Line Diameter | 0.095 inches |
| Cutting Swath | 17 inches |
| Shaft Type | Straight |
Essential warnings about potential dangers and hazards associated with operating the power tool.
Guidelines for the operator's personal safety, including protective gear and physical condition.
Safety guidelines for maintaining the weedwacker and preventing damage or accidents.
Crucial safety rules for handling, storing, and using fuel for the weedwacker.
Safety measures to follow during the cutting process to prevent injury from thrown objects.
Safety instructions for transporting and storing the weedwacker securely and safely.
Overview of the weedwacker's purpose and its key features.
Instructions for unpacking the weedwacker and identifying all carton contents.
Steps and tools required before beginning the assembly process.
Detailed steps for assembling the weedwacker, including tube and drive shaft connection.
Instructions for attaching the throttle cable and assist handle to the weedwacker.
Steps for installing the shield, cutting head, and line limiter for trimmer use.
Guidance on how to hold and position the weedwacker for optimal use.
Specifications for gasoline and the recommended 2-cycle oil mix ratio.
Information on using fuel stabilizer and the correct gasoline and oil mixture process.
Step-by-step guide for starting cold, warm, or flooded engines.
Basic guidelines for operating the weedwacker efficiently and safely.
Instructions for using the weedwacker, including safety warnings about thrown objects and hazard zones.
Safety rules for the operator and the proper use and inspection of the tool.
Safety practices during cutting and instructions for advancing the trimmer line.
Various techniques for trimming, scalping, mowing, and sweeping with the weedwacker.
Detailed steps for installing new line and replacing spools in the trimmer head.
Common problems with the trimmer head and line, and how to resolve them.
Essential maintenance safety and instructions for cleaning and maintaining the air filter.
Diagnosing engine issues and initial settings for the carburetor before adjustment.
Detailed steps for adjusting the carburetor for optimal engine performance.
Procedures for checking and adjusting engine acceleration, deceleration, and fuel mixture.
Safety and preparation steps for storing the unit and fuel safely.
Detailed instructions for preparing the engine and the entire unit for long-term storage.
