Need help?Do you have a question about the Craftsman 536.772200 and is the answer not in the manual?
General| Engine Type | 4-cycle |
|---|---|
| Fuel Type | Gasoline |
| Oil Capacity | 20 oz |
| Cutting Width | 9 in |
| Wheel Size | 7 in |
Important safety precautions, including general warnings and fuel safety guidelines.
Instructions for unpacking and assembling the edger.
A final check to ensure all assembly steps are completed before operation.
Familiarization with the edger's controls and adjustments.
How to use engine control, throttle, primer, depth, and bevel controls.
Step-by-step guide to starting the edger's engine.
A schedule outlining routine maintenance tasks for the user.
Advice for optimal edging performance and results.
Guidelines for lubricating moving parts and engine oil changes.
Procedure for draining and refilling the engine oil.
Instructions for replacing the air filter element.
How to inspect, clean, gap, and replace the spark plug.
Steps for replacing the edger's drive belt.
Procedure for replacing the cutting blade.
Proper cleaning and preparation for storing the edger.
Precautions for preventing fuel system issues during engine storage.
To Next Page