Craftsman 536.772320 User Manual

Operator's Manual
Edger
3.5 Horsepower
9 Inch Blade
Model 536.772320
CAUTION: Before using
this product, read this
manual and follow all of its
Safety Rules and
Operating Instructions.
- CRRFTSMRN °
Manual del usario
Orilladora
3.5 caballos de fuerza (hp)
de 9 pulgada I&mina
Modelo 536.772320
PRECAUCI6N: Antes de usar este
producto, lea este manual y siga
todas las reglas de seguridad e
instrucciones de operaci6n.
Sears, Roebuck and Co., Hoffman Estates, IL 60179 U.S.A.
F-021104L www.sears.com/craftsman

Craftsman 536.772320 Specifications

General

Cutting Depth	Up to 2.5 inches
Blade Length	9 inches
Oil Capacity	20 oz
Fuel Tank Capacity	0.21 gallons
Engine Type	4-cycle OHV

Summary

Warranty Statement

Safety Rules

Fuel Safety

Handle fuel carefully in approved containers, check fuel levels, and fill outdoors away from ignition sources.

Operating Safety

Operate safely, wear protection, keep clear of moving parts, and be aware of surroundings.

Assembly

How To Raise The Handle

Step-by-step instructions for adjusting the handle height and securing it properly.

How To Prepare The Engine

Instructions for filling the engine with oil and gasoline before initial operation.

Operation

Eye Protection

Always wear safety glasses or a wide vision safety mask to protect eyes from debris.

How To Use The Depth Control Lever

Instructions for operating the depth control lever to adjust the cutting blade depth.

How To Use The Engine Stop Lever

Procedures for starting and stopping the engine using the stop lever.

How To Start The Engine

Detailed steps for starting the engine, including fuel, spark plug, primer, and recoil starter.

Maintenance

Customer Responsibilities

Service and Adjustment

How To Remove The Belt

How To Replace The Blade

Procedure for safely replacing the edger blade, including torque specifications.

Trouble Shooting Chart

Edger Repair Parts