Need help?Do you have a question about the Craftsman 536.772300 and is the answer not in the manual?
Important checks and precautions before operating the edger/trimmer.
Guidelines for handling flammable fuel safely to prevent accidents.
Step-by-step instructions for safely unpacking the edger/trimmer.
Detailed instructions on how to properly use the edger function of the trimmer.
Procedures for safely stopping the engine and blade of the edger/trimmer.
How to operate the throttle control for engine speed adjustment.
Instructions for using the primer button for easier engine starting.
How to engage and disengage the cutting blade and control cutting depth.
Steps for converting the unit for trimming operation using the index lever.
How to adjust wheels for edging on uneven surfaces like curbs.
Verifying all controls are functioning correctly before starting the engine.
Instructions on checking and adding engine oil before operation.
Guidance on the type and grade of oil suitable for the engine.
Step-by-step process for adding engine oil correctly.
Outlines user duties for maintaining the edger/trimmer according to the schedule.
Provides advice on warranty and operator responsibility for maintenance.
Instructions for replacing the V-belt on the edger/trimmer.
Procedures for removing, reversing, or replacing the cutting blade.
Procedures for preparing and storing the edger/trimmer for extended periods.
Essential steps to prevent engine damage during storage.
Components and assembly of the front wheel bracket.
Parts list for the cutting blade assembly.
Components for the upper section of the handle assembly.
List of decals and their placement on the unit.
To Next Page
General