To Next Page
P
psimsAug 10, 2025
Why is my Craftsman 580.676630 failing to produce pressure?
- SSeth SpenceAug 11, 2025
If your Craftsman Pressure Washer fails to produce pressure, several factors could be the cause. First, ensure you're using a high-pressure spray tip instead of a low-pressure one. If the water inlet is blocked, clear it. Make sure the water supply is adequate and that the inlet hose isn't kinked or leaking; straighten the hose or patch any leaks. Also, check and clean the inlet hose strainer. Ensure your water supply isn't over 100°F; use a cooler supply. Check the high-pressure hose for blockages or leaks, and clear any blocks or replace the hose if needed. If the gun leaks, it may need replacement. Finally, clean the nozzle if it's obstructed. If none of these steps work, the pump may be faulty.
General
