K
kimwesleyAug 16, 2025
Why Craftsman Pressure Washer engine will not start?
- PPaul AllenAug 16, 2025
There are several possible reasons why your Craftsman Pressure Washer engine won't start or runs roughly: * Low oil level: Fill the crankcase to the proper level. * Dirty air cleaner: Clean or replace the air cleaner. * Out of or stale gasoline: Fill the fuel tank with fresh fuel. * Spark plug wire not connected: Connect the wire to the spark plug. * Bad spark plug: Replace the spark plug. * Water in gasoline: Drain the gas tank and fill with fresh fuel. * Overchoking: Open the choke fully and crank the engine.