EasyManua.ls Logo

Craftsman 580.752700 - User Manual

Craftsman 580.752700
56 pages
Save Page as PDF
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
Owner's Manual
®
6.75 HORSEPOWER
2500 PSI
2.2 GPM
HOURS: Mort. - Fri. 8 a.m. to 5 p.m. (CT)
CAUTION: Before using this product,
read this manual and follow aH Safety
Rules and Operating Instructions.
SEARS, ROEBUCK and CO., Hoffman Estates, [L 60179 U.S.A.
Visit our Craftsman website: w_v.sears.comlcraftsman
Pal_t No. 194320OS D_'afl 3 (]0 05 2004)
oSafety
oAssembly
oOperation
o Maintenance
o Parts
o Espaffo_

Table of Contents

Questions and Answers

  • M
    michael95Jul 31, 2025
    Why is my Craftsman Pressure Washer failing to produce pressure?
    • N
      Nicole ThomasJul 31, 2025
      If your Craftsman Pressure Washer isn't producing pressure, several issues could be the cause. First, make sure you're using a high-pressure spray tip. If not, replace it. Check for blockages in the water inlet and clear them. Ensure you have an adequate water supply. Inspect the inlet hose for kinks or leaks; straighten the hose or patch any leaks. Also, examine the inlet hose strainer for clogs and clean it if necessary. The water supply should be cooler than 100°F. Check the high-pressure hose for blockages or leaks and clear any blockages or replace the hose if needed. If the gun leaks, replace it. Clean the spray tip if it's obstructed. If none of these steps work, the pump may be faulty, and you should contact a Sears service facility.
  • B
    Bryan YoungAug 5, 2025
    What to do if my Craftsman 580.752700 engine will not start or runs rough?
    • C
      Christopher WarrenAug 5, 2025
      If your Craftsman Pressure Washer engine won't start or runs rough, here's what you can check: * See if the air cleaner is dirty and clean or replace it. * Make sure you have gasoline in the tank and fill it if needed. * If the gasoline is stale, drain the tank and refill with fresh fuel. * Ensure the spark plug wire is connected to the spark plug. * Replace the spark plug if it's bad. * Drain the gas tank and fill with fresh fuel if there's water in the gasoline. * If you've overchoked the engine, open the choke fully and crank the engine. If the fuel mixture is excessively rich, contact a Sears service facility.
  • J
    John HurstAug 12, 2025
    How to fix detergent failing to mix with spray on Craftsman 580.752700?
    • W
      wpittmanAug 12, 2025
      If the detergent is not mixing with the spray in your Craftsman Pressure Washer, first, check that the chemical shut-off valves are in the “On” position. Rotate the chemical shut-off valve on the desired chemical reservoir to the “On” position. Secondly, the in-line filter may be dirty, so you should check it. Lastly, make sure you are using a low-pressure spray tip instead of a high-pressure one.
  • P
    Phillip PerryAug 17, 2025
    What to do if Craftsman Pressure Washer engine bogs down when load is added?
    • M
      Mary CainAug 17, 2025
      If your Craftsman Pressure Washer engine runs well without a load but bogs down when a load is added, move the throttle control to the FAST position. If the engine still bogs down, contact a Sears service facility.
  • I
    itylerAug 25, 2025
    What to do if choke is opened too soon on Craftsman Pressure Washer?
    • C
      cruizAug 25, 2025
      If the choke is opened too soon on your Craftsman Pressure Washer, move the choke to the halfway position until the engine runs smoothly.

Summary

Warranty Information

Limited Warranty Terms

Details warranty terms, coverage, exclusions, and service availability for the pressure washer.

Safety Rules and Hazard Warnings

Hazard Symbols and Meanings

Explains various hazard symbols like Toxic Fumes, Electrical Shock, etc., and their meanings.

Carbon Monoxide and Chemical Hazards

Details dangers of carbon monoxide exhaust and harmful chemical vapors.

Slippery Surfaces and Kickback Dangers

Warns about slippery surfaces created by water and the risk of kickback from the starter cord.

Fuel Flammability and High-Pressure Water Hazards

Covers risks associated with flammable fuel and the piercing nature of high-pressure water streams.

Electrical, Heat, and Entanglement Hazards

Addresses risks from electrical contact, hot surfaces, and rotating parts.

Flying Debris, Spray Pressure, and Fragile Items

Equipment Care and Maintenance Precautions

Assembly Instructions

Assembling the Cleaning System

Adding Engine Oil and Fuel

Connecting Hoses and Water Supply

Pre-Operation Checklist

Operating Your Pressure Washer

Safe Location and Clearance

Starting the Engine

Step-by-step instructions for starting the engine and preparing for use.

Stopping the Pressure Washer

Procedures for safely shutting down the engine and releasing pressure.

Maintenance and Service

Maintenance Schedule and Responsibilities

Before Each Use Checklist

Pump and Nozzle Maintenance

Engine Maintenance Procedures

Storage Procedures

After Each Use Storage Steps

Winter and Long Term Storage

How to prepare the unit for winter or storage exceeding 30 days.

Fuel System and Pump Protection

Troubleshooting Guide

Pump Performance Issues

Addresses problems like low pressure, erratic pressure, and low water volume.

Engine Starting and Running Problems

Covers issues like engine bogging, starting, rough running, or stalling.

Craftsman 580.752700 Specifications

General IconGeneral
Power SourceGasoline
Max Pressure2700 PSI
Flow Rate2.3 GPM
Hose Length25 ft
Weight60 lb
Engine Displacement163 cc
Engine Type4-cycle OHV
Maximum Pressure2700 PSI
Water Flow2.3 GPM
Pump TypeAxial Cam
Soap TankYes
WheelsYes
Nozzles Included0°, 25°, Soap

Related product manuals