EasyManua.ls Logo

Craftsman 580.754882 - User Manual

Craftsman 580.754882
60 pages
Save Page as PDF
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
3000 PSI MAX* @ 2.4 GPM
2500 PSI @ 2.7 GPM MAX*
PRESSURE WASHER
Operator’s Manual
Model No. 580.754882
Part No. 80013110 Rev - (01/20/2015)
• Safety
• Assembly
• Operation
• Maintenance
• Parts
• Español, p. 34
HOURS: Mon. - Fri. 8 a.m. to 5 p.m. (CT)
PRESSURE WASHER
CUSTOMER HELPLINE
1-800-222-3136
ADVERTENCIA
Antes de utilizar el producto, lea este
manual y siga todas las Reglas de
Seguridad e Instrucciones de Uso.
WARNING
Before using this product, read this
manual and follow all Safety Rules
and Operating Instructions.
* This pressure washer is rated in accordance to the Pressure Washer Manufacturers Association
(PWMA) standard PW101-2010 (Testing and Rating Performance of Pressure Washers).


Sears Brands Management Corporation, Homan Estates, IL 60179 U.S.A.
Visit our Craftsman website: www.craftsman.com

Table of Contents

Questions and Answers

  • K
    Kristin WyattAug 11, 2025
    Why does my Craftsman 580.754882 Pressure Washer pump have low pressure?
    • C
      Cheryl MannAug 11, 2025
      Several factors can cause low pressure in your Craftsman Pressure Washer pump. It could be due to a low-pressure selector nozzle being installed—try replacing it with a high-pressure nozzle. Other causes include a blocked water inlet (clear it), inadequate water supply (provide adequate flow), a kinked or leaking inlet hose (straighten or patch it), a clogged inlet hose screen (check and clean it), water supply exceeding 100°F (use cooler water), a blocked or leaking high-pressure hose (clear any blockages), a leaking spray gun (replace it), or an obstructed selector nozzle (clean it).
  • D
    Daniel PerezAug 21, 2025
    How to fix a Craftsman Pressure Washer that won't start?
    • W
      William GatesAug 21, 2025
      If your Craftsman Pressure Washer engine won't start, starts and runs rough, or shuts down, consider these potential fixes: Ensure the engine rocker switch is in the ON (I) position. Check and fill the crankcase to the proper oil level. Clean or replace the air cleaner. Refill the fuel tank with fresh fuel, especially if the existing fuel is stale or contains water. Ensure the spark plug wire is securely connected to the spark plug, and replace the spark plug if it's bad.
  • A
    Adam SotoAug 30, 2025
    What to do if detergent isn't mixing in my Craftsman Pressure Washer?
    • W
      Whitney KingAug 30, 2025
      If the detergent isn't mixing with the spray in your Craftsman Pressure Washer, make sure the detergent siphoning tube is fully submerged in the detergent. Also, check the tube for clogs or cracks and clean or replace it as necessary. Ensure that you've selected the soap spray pattern nozzle on the selector nozzle. Finally, check if the detergent siphoning check ball is stuck and free it.

Craftsman 580.754882 Specifications

General IconGeneral
BrandCraftsman
Model580.754882
CategoryPressure Washer
LanguageEnglish

Related product manuals