Craftsman 82140 - Voltage Detector Specifications; Voltage Detector Setup and Operation; Voltage Detector Battery Installation

20
SPECIFICATIONS
Voltage Sensitivity 100 to 240V AC
Frequency 50/60Hz
Detection distance <0.2”
Over voltage Category III 600V
Operating Temperature 32 to 122
o
F (0 to 50
o
C)
Storage Temperature -4 to 140
o
F (-20 to 60
o
C)
Humidity <85%RH
Altitude <2000 meters (6561 feet)
Battery 2 AAA batteries
Dimensions/Weight 6x0.75x1 inches / 2oz
Safety For indoor use and in accordance with
Overvoltage Category III, Pollution Degree 2.
BATTERY INSTALLATION
6. Open the battery door (end cap) by gently
prying up/out at the pocket clip using a small
screwdriver.
7. Insert two AAA batteries (observe polarity).
8. Replace the battery door.
NOTE: If your meter does not work properly,
check the battery to make sure that it still
good and that it is properly inserted.
E
n
R
f
o
r
e
End cap
Removal
for battery
replacement