This meter has been designed for safe use, but must be
operated with caution. The rules listed below must be carefully
followed for safe operation.
NEVERapplyvoltage orcurrent to themeterthat exceedsthe specified
maximum:
Input Protection Limits
Function Maximum Input
V DC or V AC 600V AC and DC
mA AC/DC 200mA DC/AC
AAC/DC 10A DC/AC (for 30 seconds max.
every 15 minutes)
Resistance, Diode Test, 250V DC/AC
Continuity
2. USEEXTREMECAUTIONwhenworkingwith highvoltages.
3. DONOTmeasurevoltageif the voltageonthe "COM" inputjack exceeds
600V aboveearthground.
4. NEVERconnectthe meterleads acrossa voltagesourcewhilethefunction
switch is inthe current, resistance,ordiodemode. Doingso candamage
the meter.
5. ALWAYS dischargefiltercapacitorsinpowersuppliesanddisconnectthe
powerwhen makingresistanceordiodetests.
6. ALWAYS turnoff powerand disconnecttest leadsbeforeopeningthe
covers to replacethe fuse orbattery.
7. NEVERoperatethe meterunlessthe backcoverand the batteryandfuse
covers arein place andfastenedsecurely.
8. Ifthe equipmentisusedin a mannernot specifiedby the manufacturer,the
protectionprovidedby the equipmentmaybe impaired.
To Next Page
Loading...
