To Next PageTo Next Page
Need help?Do you have a question about the Craftsman 82141 and is the answer not in the manual?
General| Auto-Ranging | Yes |
|---|---|
| Continuity Check | Yes |
| Diode Test | Yes |
| Power Source | 9V Battery |
| Category | Digital Multimeter |
| Display | Digital |
| Measurement Functions | Voltage, Current, Resistance, Continuity, Diode |
| Current Range | Up to 10A AC/DC |
| Resistance Range | Up to 20MΩ |
Details the one-year full warranty, commercial use warranty, legal rights, and customer assistance contact information.
Outlines maximum input limits for various functions and critical safety precautions for multimeter operation.
Explains the meaning of various safety symbols found on the multimeter and in the manual.
Identifies and labels the main controls, jacks, and display of the multimeter.
Provides definitions for symbols and annunciators used for measurements like continuity, diode tests, and units.
Lists the specifications for DC/AC Voltage, Current, Resistance, and Battery Test, including ranges and accuracy.
Details specifications for diode/continuity tests, battery test current, input impedance, display, and environmental conditions.
Step-by-step instructions for safely installing or replacing the multimeter's battery, including necessary precautions.
Provides general operating guidelines and detailed steps for safely measuring DC voltages.
Details the procedure for safely measuring AC voltages, including warnings for specific outlet types.
Explains how to safely measure DC current, including range selection and cautions for the 10A scale.
Explains how to safely measure AC current, including range selection and cautions for the 10A scale.
Details the procedure for measuring resistance, emphasizing safety and proper probe placement.
Details the procedure for performing a continuity check, including audible signal indication.
Provides instructions for performing a diode test, including expected voltage readings for good, shorted, and open diodes.
Details how to test batteries (1.5V and 9V) and interpret the results using the multimeter.
Provides essential guidelines for keeping the multimeter clean, dry, and in good working condition, including storage tips.
Guides users through the safe and correct procedures for replacing the multimeter's batteries and fuses.
Offers solutions for common issues like the meter not operating, focusing on battery and fuse checks.
Lists available replacement parts and provides contact information for customer service and parts ordering.
