EasyManua.ls Logo

Craftsman 82170 User Manual

Craftsman 82170
17 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
Owner's Manual
Digital MultiMeter
Model No.
82170
Sears, Roebuck and Co., Hoffman Estates, IL 60179
www.craftsman.com 061606
Safety
Operation
Maintenance
Español
CAUTION: Read, understand and
follow Safety Rules and Operating
Instructions in this manual before
using this product.
Question and Answer IconNeed help?

Do you have a question about the Craftsman 82170 and is the answer not in the manual?

Craftsman 82170 Specifications

General IconGeneral
CategoryMultimeter
Model82170
BrandCraftsman
TypeDigital
DisplayLCD
Continuity TestYes
Diode TestYes
Battery Type9V
Auto Power OffYes
Low Battery IndicatorYes
Safety RatingCAT II 600V
AC Current Range200μA to 10A
DC Current Range200μA to 10A
Resistance Range200Ω to 20MΩ

Summary

One Year Full Warranty

Extreme Caution for Device Use

A critical warning emphasizing extreme caution due to potential injury or death from improper use.

Safety Instructions

General Safety Precautions

Numbered safety rules for operating the multimeter, including handling high voltages and test leads.

Battery Installation

Battery Replacement Procedure

Step-by-step instructions for safely installing and replacing the multimeter's battery.

Operating Instructions

DC Voltage Measurements

Procedure for DC Voltage Measurement

Step-by-step instructions for measuring DC voltage, including safety cautions.

AC Voltage Measurements

Procedure for AC Voltage Measurement

Step-by-step instructions for measuring AC voltage, including safety warnings for outlets.

DC Current Measurements

Procedure for DC Current Measurement

Instructions for measuring DC current up to 200mA and 20A, with caution for the 20A scale.

AC Current Measurements

Procedure for AC Current Measurement

Instructions for measuring AC current up to 200mA and 20A, with safety warnings.

Resistance Measurements

Procedure for Resistance Measurement

Steps for measuring resistance, emphasizing circuit disconnection and capacitor discharge.

Continuity Check

Procedure for Continuity Testing

Instructions for checking continuity, noting the audible signal and '1' display for open circuits.

Replacing the Fuses

Troubleshooting

Related product manuals